The silicone insert is a replacement part for the crown pliers 7270-90 F.
The occlusal spoon "Scheufele" with a length of 11 cm is used in dentistry to take impressions.Application: Fill the spoon with impression material so that it reaches the upper and lower edges of the spoon. Then remove the impression tray. *Only while stocks last!
The occlusion spoon "Scheufele" has a length of 13 cm. It precisely guides the impression material to the jaw sections to ensure maximum accuracy of the required impressions.Application: The spoon is filled with impression material so that the material reaches the upper and lower edges of the spoon. After the impression material has hardened, the spoon with the impression is removed from the mouth without the risk of deformation.
The perforated impression tray according to Ehricke is suitable for impressions on the partially dentate mandible. Width: 59 mmdepth: 71 mmForm PU (INF/P) Only while stocks last!
Crown pliersWith leather insertsFor prosthodontia
The denture lifter in F-LINE SUPER LIGHT Design has a length of 155 mm. The working part has a length of 14 mm, with a width of 0.5 mm at the tip and 2.0 mm at the upper part of the tip.Application: Insert the pointed end of the prosthesis lifter between two telescopic crowns or between the telescopic crown and the prosthesis. By even and gentle pulling (at the front and rear ends of the telescopic crown or prosthesis), the compound will be dissolved. This should be done uniformly, in small steps.
The impression tray according to Ehricke is perforated and specially designed for impressions on the partially dentate lower jaw. Width: 59 mmdepth: 80 mmForm PU (INF/P) Only while stocks last!
The denture lifter in F-LINE PEAR HANDLE Design is an instrument for denture removal. Its shape ensures easy handling and efficient application. The working part has a width of 4.0 mm and a length of 160 mm.
The insert for the crown remover (Single) is an accessory for the crown remover sets 2595-1 and 2595-2. It enables successful crown removal.
The insert for the crown remover (Single) is a high-quality addition to product 2595-4. It ensures successful crown removal.
Application: For the removal of crowns. With a length of 210 mm.Included in the set:2595-A Crown remover insert (80 mm)2595-B Crown remover insert (80 mm)2595-C Crown remover insert (80 mm)2595-1 G Weight for crown remover (27 mm)2595-1 S Rod for crown remover (143 mm)2595-1 ST Key for crown remover (4 mm)
The articulating paper forceps "Miller" with cross-ridged pattern provides a secure grip of articulating paper to precisely check bite impressions. The working part has a width of 4.0 mm.
Crown pliers14.0 cm"Dr. Krause-Hohenstein"
The crown spreading pliers from the F-LINE PLAIN SURFACE series is a tool for the precise and easy spreading of crowns with minimal force. The tip of the pliers is inserted into the slotted crown and expanded by activating the pliers. Length: 140 mm.
The insert for the crown remover (Single) is an accessory for the sets 2595-1 and 2595-2. It allows for easy application and successful crown removal.
The impression tray according to Ehricke is perforated and suitable for impressions on the partially dentate upper jaw. Width: 51 mmdepth: 52 mmForm PO (SUP/P) Only while stocks last!
The impression tray according to Ehricke is perforated and suitable for impressions on the partially dentate mandible. Width: 53 mmdepth: 64 mmForm PU (INF/P) Only while stocks last!
The robust crown spreader "Dr. Mazouch" Universal from the F-LINE PEAR HANDLE series is used for the quick removal of individual crowns using a preformed groove. Suitable for the front and side tooth areas.
The perforated Ehricke impression tray is specifically designed for impressions of the partially toothed upper jaw.Width: 60 mmDepth: 73 mmShape PO (SUP/P)Only while stocks last!
The perforated impression tray according to Ehricke is suitable for impressions of the partially dentate upper jaw.Width: 54 mmDepth: 72 mmShape PO (SUP/P)Only while stocks last!
The guide forceps "Barth" features the ergonomic F-LINE ROUND SOLID design. It has an overall length of 171 mm and a notch size of Ø 1.7 mm - providing the necessary grip during surgical procedures, such as holding screwdrivers.Application: The guide forceps enable work with all screwdrivers of common implant systems. The use of the guide forceps facilitates easier replacement of abutments.
The crown spreader "Esthetic" in F-LINE SUPER LIGHT design is double-ended with working part sizes of 4.0 mm / 4.0 mm and a total length of 171 mm.Application: Despite its delicate appearance, this crown spreader fulfills its full purpose. The fine working ends ensure easy access.
Crown spreading forceps For prosthodontia
The universal pliers or removal pliers have a total length of 160 mm and a working part length of 25 mm. They feature TC hard metal blades on the working part and a flattened jaw end. In F-LINE PLAIN SURFACE grip design.Application: This universal pliers is ideally suitable for removing/extracting and introducing objects such as matrices, interdental wedges, cannulas and syringes, crowns, nerve broaches, root canal files, rotating instruments and much more. The flattened jaw ends and integrated hard metal blades ensure objects to be held easily and securely. The outwards curved limbs of the pliers are a particular advantage. They enable a good view of the pliers jaws and onto the area of use, thus making work easier.
Dental Prosthetics and Functional Restoration: The Importance of Prosthodontics in Dentistry
Prosthodontics aims to restore lost teeth functionally and aesthetically. Partial or complete tooth loss impairs the patient's chewing, speaking function, and appearance. In addition to purely medical aspects, prosthodontics also seeks to improve the patient's quality of life through appropriate dental prostheses. Common prostheses include crowns, bridges, fixed, and removable dentures. Orthodontics with special appliances such as braces is used for correcting tooth misalignments or deviations.
At devemed Dentalshop, you will find a wide selection of dental instruments for orthodontics and prosthodontics. For example, our portfolio includes denture removers, crown forceps, crown removers, impression trays, side cutters, crown scissors, tampon pluggers, and much more.
Need advice on dental instruments for your dental practice equipment or practice establishment? Then our competent specialist team for dental tools will be happy to assist you (info@devemed.de / +49 (0) 7467 949 199 0).
