Silicone insert | Art No. 7270-90 F
The silicone insert is a replacement part for the crown pliers 7270-90 F.
Crown pliers | with leather inserts
Crown pliersWith leather insertsFor prosthodontia
Prosthesis elevator | 0.5 / 2.0 mm | F-LINE
The denture lifter in F-LINE SUPER LIGHT Design has a length of 155 mm. The working part has a length of 14 mm, with a width of 0.5 mm at the tip and 2.0 mm at the upper part of the tip.Application: Insert the pointed end of the prosthesis lifter between two telescopic crowns or between the telescopic crown and the prosthesis. By even and gentle pulling (at the front and rear ends of the telescopic crown or prosthesis), the compound will be dissolved. This should be done uniformly, in small steps.
Prosthesis elevator | 4.0 mm | F-LINE
The denture lifter in F-LINE PEAR HANDLE Design is an instrument for denture removal. Its shape ensures easy handling and efficient application. The working part has a width of 4.0 mm and a length of 160 mm.
Insert for crown remover | Art No. 2595-1 / 2595-2
The insert for the crown remover (Single) is an accessory for the crown remover sets 2595-1 and 2595-2. It enables successful crown removal.
Insert for crown remover | Art No. 2595-4
The insert for the crown remover (Single) is a high-quality addition to product 2595-4. It ensures successful crown removal.
Diamond plated insert | Art No. 2746-1 & 2746-3
Tip: Rigidfor 2746-1 and 2746-3diamond-coatedReplacement tip for telescopic crown pliers
Crown remover 2595-1 | SET
Application: For the removal of crowns. With a length of 210 mm.Included in the set:2595-A Crown remover insert (80 mm)2595-B Crown remover insert (80 mm)2595-C Crown remover insert (80 mm)2595-1 G Weight for crown remover (27 mm)2595-1 S Rod for crown remover (143 mm)2595-1 ST Key for crown remover (4 mm)
Crown spreading forceps | F-LINE
The crown spreading pliers from the F-LINE PLAIN SURFACE series is a tool for the precise and easy spreading of crowns with minimal force. The tip of the pliers is inserted into the slotted crown and expanded by activating the pliers. Length: 140 mm.
Insert for crown remover | Art No. 2595-1 / 2595-2
The insert for the crown remover (Single) is an accessory for the sets 2595-1 and 2595-2. It allows for easy application and successful crown removal.
Crown spreader "Dr. Mazouch" | universal | F-LINE
The robust crown spreader "Dr. Mazouch" Universal from the F-LINE PEAR HANDLE series is used for the quick removal of individual crowns using a preformed groove. Suitable for the front and side tooth areas.
Crown spreader "Esthetic" | 4.0 / 4.0 mm | F-LINE
The crown spreader "Esthetic" in F-LINE SUPER LIGHT design is double-ended with working part sizes of 4.0 mm / 4.0 mm and a total length of 171 mm.Application: Despite its delicate appearance, this crown spreader fulfills its full purpose. The fine working ends ensure easy access.
Crown spreading forceps
Crown spreading forceps For prosthodontia
Universal removing pliers | TC | F-LINE
The universal pliers or removal pliers have a total length of 160 mm and a working part length of 25 mm. They feature TC hard metal blades on the working part and a flattened jaw end. In F-LINE PLAIN SURFACE grip design.Application: This universal pliers is ideally suitable for removing/extracting and introducing objects such as matrices, interdental wedges, cannulas and syringes, crowns, nerve broaches, root canal files, rotating instruments and much more. The flattened jaw ends and integrated hard metal blades ensure objects to be held easily and securely. The outwards curved limbs of the pliers are a particular advantage. They enable a good view of the pliers jaws and onto the area of use, thus making work easier.
Crown pliers | with silicone inserts | F-LINE
The crown pliers feature silicone inserts (2693) for the gentle removal of crowns. The pliers have a length of 155 mm and feature an adjusting screw that prevents slipping or crushing of the crown.Application: Due to the special shape of the pliers, you can easily remove crowns and bridges during the trial fitting in both the upper and lower jaw areas. This means you only need one model instead of one for the upper jaw and one for the lower jaw. The interchangeable elastic rubber inserts prevent damage to the crown surface. These inserts are replaceable and can be sterilized up to 180°C.
Crown pliers "Weingart" | TC | F-LINE
Crown pliers/wire holding and ligature pliers according to Weingart in F-LINE PLAIN SURFACE design with a total length of 155 mm. The working end features inserts made of tungsten carbide (TC) for durable use and a secure grip when holding the crown.
Telescopic crown pliers | Tip: rigid/rigid
Tip: Fixed/Fixed. The curved telescopic crown pliers have a total length of 130 mm. The diamond coating enables a secure grip on the crown without slipping. The tips are replaceable.
Weight for crown remover | Art No. 2595-2 / 2595-4
The weight for the crown remover (Single) is a suitable addition for products 2595-2 and 2595-4. It ensures additional stability and optimal handling.
Crown removing pliers | 45° | F-LINE
Application: The crown removal pliers with adjusting screw and silicone inserts in F-LINE PLAIN SURFACE Design is a dental instrument for secure crown removal. The adjusting screw allows for force limitation to be set, preventing damage to the crown. The silicone inserts also prevent damage to the crown. Angled at 45° with a length of 160 mm.
Crown Scissors "Beebee" | curved | saw edge | 120 mm
The crown scissors "Beebee" with a length of 12 cm is curved and serrated.Application: Used to adjust temporary crowns for the patient.
Crown remover 2595-4 | SET
Application: For removing crowns in dentistry. Crown removal set with a guide rail. The total length is 190 mm. The following instruments are included:2595-4 A: Insert for crown removal2595-4 B: Insert for crown removal2595-4 C: Insert for crown removal2595-2 G: Weight for crown removal2595-2 S: Rod for crown removal2595-1 ST: Key for crown removal
Insert for crown remover | Art No. 2595-4
The insert for the crown remover (Single) is a practical addition to set 2595-4. It ensures successful crown removal.
Crown spreader | premolars and molars | F-LINE
The crown spreader from the F-LINE PEAR HANDLE series is an instrument with a length of 16.0 cm. It is specifically designed for spreading crowns on premolars and molars.
Insert for crown remover | Art No. 2595-4
The insert for the crown remover (Single) is an indispensable extension for product 2595-4. It enables successful crown removal.
Instruments for working on crowns
Discover an extensive selection of specialized crown instruments in our dental online store, which are essential for precision and efficiency in your dental practice. Our crown instruments category offers everything you need for handling, fitting and removing dental crowns.
Our range includes:
Crown spreaders: Ideal for carefully spreading and loosening cemented crowns without damaging the underlying tooth.
Crown removal forceps: Designed to safely and efficiently remove crowns from teeth by applying even pressure.
Denture lifters: Perfect for removing fixed dentures and crowns without damaging the gum or tooth.
Crown benders: Allow gentle adjustment of the crown to the tooth to achieve a perfect fit. Telescopic crown forceps: Specially designed for handling and fitting telescopic crowns with precise control.
Crown scissors: For precise cutting of crown margins and adjusting the shape of the crown.
Each instrument in our "Crown Instruments" category is made from high quality materials to ensure durability and reliability. The instruments are designed for easy cleaning and sterilization to meet the hygiene standards in your practice. Whether you need to fit, remove or finish crowns, our tools are designed to give you the best support. Discover our selection now and find the ideal instruments to suit your needs and requirements.
