Screws/Pins
» Download FlyerThe dev-pin TITAN Pins are suitable for securing titanium foils and membranes. The pins with HEX HEAD enable a secure attachment and can be easily removed after healing using the pin driver (4311-00). The pins are 3 mm long, providing reliable fixation for your applications. The pack contains 10 pins.
The applicator (titanium end piece) facilitates easy removal of the pins from the box and direct attachment to the jaw. The straight applicator or titanium end piece is screwed onto the handle via the thread and can be easily replaced as needed. It comes with a protective cap and is suitable for 4902-00 F.
» Download FlyerThe dev-pin TITAN Pins are top-notch instruments for securing titanium foils and membranes. The pins with a smooth head allow for secure fixation and can be easily removed using the pin remover (4902-70 F) after healing. The pins have a length of 3 mm and provide reliable fixation for your applications. The package includes 15 pins.
The applicator (Titan end piece) allows for convenient picking up of the pins from the box and direct attachment to the jaw. The curved applicator or titanium end piece is screwed onto the handle by the thread and can thus be easily replaced as needed.With protective cap suitable for 4902-00 FCurvedWith thread
The ROUND SOLID handle for the titanium end pieces provides excellent grip during pulling and pushing movements and ensures direct force transmission to the pin. It fits comfortably in the hand and is easy to clean.Length: 133 mmFor titanium end pieces 4902-10 / 4902-15
» Download FlyerThe dev-os microscrews | INOX were consistently engineered to meet the specific demands of dental augmentation and demonstrate their particular strengths in the shell technique for fixation of cortical bone plates. A key factor is the high mechanical strength of the implant-grade stainless steel used. This material enables the production of screws with a diameter of just 1.0 mm and lengths of up to 14 mm while maintaining the necessary bending resistance and torsional stability. In this dimension, comparable titanium solutions are structurally limited, as very slender and simultaneously long screws made of titanium carry an increased risk of deformation or head fracture. The combination of a slim diameter and extended length allows reliable three-dimensional stabilization of bone plates, even in large augmentation volumes. Two thread diameters (1.0 mm and 1.2 mm) provide additional flexibility with regard to bone quality and the desired level of primary stability. In addition to its high mechanical strength, stainless steel offers a further clinical advantage: its intentionally low osseointegration allows even long screws to be removed in a controlled manner with moderate torque after the healing phase. This enhances safety during the second-stage procedure and reduces the risk of screw head fracture. The proven QUADRO screw head ensures form-fit torque transmission, prevents stripping, and enables precise and secure handling within the surgical field. The dev-os microscrews | INOX therefore represent maximum stability at minimal diameter and a practice-oriented system specifically tailored to the requirements of modern augmentation techniques. The dev-os INOX (stainless steel) micro screws 4510-XX have a diameter of Ø 1.0 mm. The following lengths are available (please select above):4510-04: Length: 4 mm | Diameter: Ø 1.0 mm4510-06: Length: 6 mm | Diameter: Ø 1.0 mm4510-08: Length: 8 mm | Diameter: Ø 1.0 mm4510-10: Length: 10 mm | Diameter: Ø 1.0 mm4510-12: Length: 12 mm | Diameter: Ø 1.0 mm4510-14: Length: 14 mm | Diameter: Ø 1.0 mmLike all devemed screws, the INOX micro screws feature the proven QUADRO screw head – this prevents the screw from spinning and improves the grip of the screwdriver. This ensures secure pickup and precise placement of the screw. They are sold in packs of 3.Compatible with the following accessories:Screwdriver blades 4210-30 (70 mm) & 4210-31 (30 mm) (requires handle 4311-00)Pilot drills 4210-10 (Ø 0.8 mm x 10 mm; gradations 4-6-8) & 4210-14 (Ø 0.8 mm x 14 mm; gradations 4-6-8-10-12-14)Inlay 4410-30 for modular toolbox 4400-10
» Download FlyerThe dev-pin TITAN Pin is excellent for securing titanium foils and membranes. The pin with a HEX-HEAD head provides a secure hold and can be easily removed after healing using the pin driver, thanks to the thread. The pin is 5 mm long, allowing for stable fixation of your materials. The pack contains 10 pins.
The dev-pin Pin Applicator provides a convenient way to pick up pins from the tool box and apply them directly to the jaw. With its dental attachment, the applicator is perfectly compatible with the dev-os hand driver. The straight titanium tip allows for precise handling, and the 50mm length provides an optimal reach.
The pin remover from the dev-pin system enables easy and gentle removal of pins from the jawbone. The working part is 4.0 mm wide (outer) and 1.0 mm wide (inner). The instrument in F-LINE SUPER LIGHT design has a total length of 165 mm.
» Download FlyerThe QUADRO titan micro screws 4013-XX have a diameter of Ø 1.3 mm. They are available in the following lengths (please select above):4013-05: Length: 5 mm | Diameter: Ø 1.3 mm4013-07: Length: 7 mm | Diameter: Ø 1.3 mm 4013-09: Length: 9 mm | Diameter: Ø 1.3 mm4013-11: Length: 11 mm | Diameter: Ø 1.3 mm4013-13: Length: 13 mm | Diameter: Ø 1.3 mm 4013-15: Length: 15 mm | Diameter: Ø 1.3 mmThe screw head with the slightly conical Quadro profile prevents the screw from spinning and ensures a better grip on the screwdriver. This ensures secure pick-up and placement. The screws are yellow in colour. They are sold in packs of 5.The dev-os QUADRO screwdriver blades 4213-20 and 4213-21 are suitable for this purpose
The screwdriver blade for Ø 1.0 mm QUADRO TITAN micro-screws is available in a length of 30 mm. The QUADRO profile ensures a reliable fixation and prevents the screw from slipping. This blade is compatible with screw systems of Ø 1.0 mm diameter and enables precise work. Without color marking, with dental attachment.
The drill 4213-00 is used to perform pre-drilling for dev-os QUADRO TITAN micro-screws with a diameter of Ø 1.3 mm. The pilot drill has a diameter of Ø 1.0 mm. The diameter is slightly narrower than the titanium screw to ensure a secure hold in the jaw.The drill is graduated (5-7-9-11-13 mm) and has a stop at 15 mm to prevent drilling too deep. The total length is 33 mm. With standardized dental attachment.
» Download FlyerThe dev-pin TITAN Pin is excellent for securing titanium foils and membranes - it features the HEX-HEAD head, which provides a secure hold and can be easily removed after healing using the pin driver (4902-55), thanks to the thread. The pin is 5 mm long, allowing for stable fixation of your materials. The pack contains 15 pins.
With its very pointed working end, holes for pins can be pre-drilled in the membrane using the pin punch. The working part has a length of 2.5 mm. The instrument features the F-LINE ROUND SOLID design and has a total length of 170 mm.
The dev-pin pin box, made of stainless steel with a black coating, is the ideal storage solution for pins. The box can be easily opened with one hand and can hold up to 15 pins. Thanks to its robust coating, the box is scratch-resistant and particularly durable.For Ø 3 mm: 10 pcs / Ø 5 mm: 5 pcs.F-LINE DesignBLACK EDITION
» Download FlyerThe QUADRO titan micro screws 4010-XX have a diameter of Ø 1.0 mm. The following lengths are available (please select above):4010-05: Length: 5 mm | Diameter: Ø 1.0 mm4010-07: Length: 7 mm | Diameter: Ø 1.0 mm4010-09: Length: 9 mm | Diameter: Ø 1.0 mmThe screw head with a slightly conical Quadro profile prevents the screw from spinning and improves the grip of the screwdriver. This ensures that the screw is picked up and placed securely. The screws are green anodised. They are sold in packs of 5. Can be used in combination with the dev-os QUADRO screwdriver blades 4210-20 and 4210-21
The hammer is made of pure stainless steel and is used, for example, for driving pins. Its balanced weight distribution ensures ideal balance, making it comfortable to hold and allowing for controlled force transmission.It is first used with the pin punch 4902-80 F for pre-punching. The pin is then driven in using the pin applicator 4311-00 or 4902-20.Length: 16.5 cm, Weight: 125 g
The screwdriver handle with silicone grip is suitable for:Screwdriver bladesPin applicatorPin driverIt enables comfortable handling. The pressure point at the back is fixed, the silicone handle can be rotated - this makes it easier to tighten and loosen screws and pins. With dental attachment.The handle is suitable for the following diameters of the dev-os system:Ø 1.0 mmØ 1.3 mmØ 1.5 mmØ 1.8 mmApplication: Place the pressure point against the palm of your hand and turn the silicone handle using your fingers. This enables simple and reliable turning by hand.
The QUADRO screwdriver blade is available in a compact length of 30 mm. The QUADRO profile provides a secure hold and prevents the screw from spinning.This blade is suitable for screw systems with Ø 1.3 mm, Ø 1.5 mm and Ø 1.8 mm diameters. Without colour coding.
The pilot drill 4210-00 is used to perform pre-drilling for the dev-os QUADRO TITAN micro-screws with a diameter of Ø 1.0 mm. The pilot drill has a diameter of Ø 0.7 mm - it is therefore slightly narrower than the titanium screw to ensure a secure hold in the jaw.The drill has a stop at 7 mm to prevent drilling too deep. The total length is 40 mm. With standardized dental attachment.
The drill bit 4215-00 is used to perform pre-drilling for the dev-os QUADRO TITAN micro-screws with a diameter of Ø 1.5 mm. The pilot drill has a diameter of Ø 1.2 mm, which is slightly smaller than the titanium screw, to ensure a secure hold in the jaw. It is graduated (5-7-9-11-13 mm) and has a stop at 15 mm to prevent over-drilling. The total length is 33 mm. With standardized dental attachment.
The drill bit 4218-00 is used for pre-drilling for the dev-os QUADRO TITAN micro-screws with a diameter of Ø 1.8 mm. The pilot drill has a diameter of Ø 1.5 mm, which is slightly smaller than the titanium screw, ensuring a secure hold in the jaw. It is graduated (5-7-9-11-13 mm) and has a stop at 15 mm to prevent over-drilling. The total length is 33 mm. With standardized dental attachment.
The dev-pin HEX-HEAD pin remover allows for quick and easy removal of the HEX HEAD pins placed in the jaw after healing. With its straight titanium tip and the matching dental attachment for the handle 4311-00, the pin remover offers precise and comfortable handling. It is specifically designed for the removal of pins (Item No. 4901-13 & 4901-15).Length: 50 mmWorking part width: 0.9 mm
» Download FlyerThe QUADRO titan micro screws 4015-XX have a diameter of Ø 1.5 mm and are available in different lengths (please select above):4015-05: Length: 5 mm | Diameter: Ø 1.5 mm4015-07: Length: 7 mm | Diameter: Ø 1.5 mm4015-09: Length: 9 mm | Diameter: Ø 1.5 mm4015-11: Length: 11 mm | Diameter: Ø 1.5 mm4015-13: Length: 13 mm | Diameter: Ø 1.5 mm4015-15: Length: 15 mm | Diameter: Ø 1.5 mmThe screw head with the slightly conical Quadro profile prevents the screw from spinning and ensures a better grip on the screwdriver. This ensures secure pick-up and placement. The screws are available in ‘original grey’ and are sold in packs of 5.
