Micro-Screws (INOX) | dev-os
» Download FlyerThe dev-os microscrews | INOX were consistently engineered to meet the specific demands of dental augmentation and demonstrate their particular strengths in the shell technique for fixation of cortical bone plates. A key factor is the high mechanical strength of the implant-grade stainless steel used. This material enables the production of screws with a diameter of just 1.0 mm and lengths of up to 14 mm while maintaining the necessary bending resistance and torsional stability. In this dimension, comparable titanium solutions are structurally limited, as very slender and simultaneously long screws made of titanium carry an increased risk of deformation or head fracture. The combination of a slim diameter and extended length allows reliable three-dimensional stabilization of bone plates, even in large augmentation volumes. Two thread diameters (1.0 mm and 1.2 mm) provide additional flexibility with regard to bone quality and the desired level of primary stability. In addition to its high mechanical strength, stainless steel offers a further clinical advantage: its intentionally low osseointegration allows even long screws to be removed in a controlled manner with moderate torque after the healing phase. This enhances safety during the second-stage procedure and reduces the risk of screw head fracture. The proven QUADRO screw head ensures form-fit torque transmission, prevents stripping, and enables precise and secure handling within the surgical field. The dev-os microscrews | INOX therefore represent maximum stability at minimal diameter and a practice-oriented system specifically tailored to the requirements of modern augmentation techniques. The dev-os INOX (stainless steel) micro screws 4510-XX have a diameter of Ø 1.0 mm. The following lengths are available (please select above):4510-04: Length: 4 mm | Diameter: Ø 1.0 mm4510-06: Length: 6 mm | Diameter: Ø 1.0 mm4510-08: Length: 8 mm | Diameter: Ø 1.0 mm4510-10: Length: 10 mm | Diameter: Ø 1.0 mm4510-12: Length: 12 mm | Diameter: Ø 1.0 mm4510-14: Length: 14 mm | Diameter: Ø 1.0 mmLike all devemed screws, the INOX micro screws feature the proven QUADRO screw head – this prevents the screw from spinning and improves the grip of the screwdriver. This ensures secure pickup and precise placement of the screw. They are sold in packs of 3.Compatible with the following accessories:Screwdriver blades 4210-30 (70 mm) & 4210-31 (30 mm) (requires handle 4311-00)Pilot drills 4210-10 (Ø 0.8 mm x 10 mm; gradations 4-6-8) & 4210-14 (Ø 0.8 mm x 14 mm; gradations 4-6-8-10-12-14)Inlay 4410-30 for modular toolbox 4400-10
The screwdriver handle with silicone grip is suitable for:Screwdriver bladesPin applicatorPin driverIt enables comfortable handling. The pressure point at the back is fixed, the silicone handle can be rotated - this makes it easier to tighten and loosen screws and pins. With dental attachment.The handle is suitable for the following diameters of the dev-os system:Ø 1.0 mmØ 1.3 mmØ 1.5 mmØ 1.8 mmApplication: Place the pressure point against the palm of your hand and turn the silicone handle using your fingers. This enables simple and reliable turning by hand.
» Download FlyerThe dev-os microscrews | INOX were consistently engineered to meet the specific demands of dental augmentation and demonstrate their particular strengths in the shell technique for fixation of cortical bone plates. A key factor is the high mechanical strength of the implant-grade stainless steel used. This material enables the production of screws with a diameter of just 1.0 mm and lengths of up to 14 mm while maintaining the necessary bending resistance and torsional stability. In this dimension, comparable titanium solutions are structurally limited, as very slender and simultaneously long screws made of titanium carry an increased risk of deformation or head fracture. The combination of a slim diameter and extended length allows reliable three-dimensional stabilization of bone plates, even in large augmentation volumes. Two thread diameters (1.0 mm and 1.2 mm) provide additional flexibility with regard to bone quality and the desired level of primary stability. In addition to its high mechanical strength, stainless steel offers a further clinical advantage: its intentionally low osseointegration allows even long screws to be removed in a controlled manner with moderate torque after the healing phase. This enhances safety during the second-stage procedure and reduces the risk of screw head fracture. The proven QUADRO screw head ensures form-fit torque transmission, prevents stripping, and enables precise and secure handling within the surgical field. The dev-os microscrews | INOX therefore represent maximum stability at minimal diameter and a practice-oriented system specifically tailored to the requirements of modern augmentation techniques. The dev-os INOX micro screws (stainless steel), model 4512-XX, come with a diameter of Ø 1.2 mm (a range of lengths is available for selection above):4512-04: Length: 4 mm | Diameter: Ø 1.2 mm 4512-06: Length: 6 mm | Diameter: Ø 1.2 mm 4512-08: Length: 8 mm | Diameter: Ø 1.2 mm 4512-10: Length: 10 mm | Diameter: Ø 1.2 mm 4512-12: Length: 12 mm | Diameter: Ø 1.2 mm 4512-14: Length: 14 mm | Diameter: Ø 1.0 mm Like all devemed screws, they are equipped with the reliable QUADRO screw head, which prevents rotation during handling and enhances the screwdriver’s grip. This design enables secure pickup and accurate screw placement. Each pack contains 3 screws.Compatible with the following accessories:Screwdriver blades 4210-30 (70 mm) & 4210-31 (30 mm) (requires handle 4311-00) Pilot drills 4212-10 (Ø 0.8 mm x 10 mm; gradations 4-6-8) & 4212-14 (Ø 0.8 mm x 14 mm; gradations 4-6-8-10-12-14)Inlay 4410-30 for modular toolbox 4400-10
2-in-1 toolbox incl. cover for micro screws, pins and accessories. The box is sold empty, without contents or inlays. Clear arrangementIndividually configurableSupports simple, direct storage of screws and pinsFor storage of: Handle (4311-00) Screws Pins Drills (short/long) Pin applicator 4902-20 Pin driverCompatible with the following inlays:Titanium micro screws Ø 1.0 / 1.3 mm: 4410-10Titanium micro screws Ø 1.5 / 1.8 mm: 4410-15INOX micro screws Ø 1.0 / 1.2 mm: 4410-30INOX tenting-screws Ø 4.0 / 6.0 mm head: 4410-50Pins: 4410-70
Inlay for the modular toolbox 4400-10 and the cube 4400-15.Compatible with the following stainless steel micro screws:4510-04 4510-06 4510-08 4510-10 4510-12 4510-14 4512-04 4512-06 4512-08 4512-10 4512-12 4512-14
The Cube is a supplement to the large toolbox or an alternative to the pin box 4903-00 FBC. It is designed for storing screws and pins. Thanks to various inlays, the Cube can be used flexibly. It comes with a lid but is sold empty and without an inlay.Compatible with the following inlays:Inlay for titanium micro screws Ø 1.0 / 1.3 mm: 4410-10Inlay for titanium micro screws Ø 1.5 / 1.8 mm: 4410-15Inlay for INOX micro screws Ø 1.0 / 1.2 mm: 4410-30Inlay for INOX tenting-screws Ø 4.0 / 6.0 mm head: 4410-50Inlay for titanium pins: 4410-70
The pilot drill 4210-10 is used to create pilot holes for dev-os stainless steel micro screws with a diameter of Ø 1.0 mm. The drill has a diameter of Ø 0.8 mm, making it slightly narrower than the screw to ensure secure anchorage in the jawbone.The drill features a built-in 10 mm stop to prevent over-drilling. Total length: 25 mm. Equipped with a standard dental shaft.Graduation: 4-6-8 mm
The pilot drill 4210-14 is used to create pilot holes for dev-os stainless steel micro screws with a diameter of Ø 1.0 mm. It has a diameter of Ø 0.8 mm and a cutting length of 14 mm. Pre-drilling ensures reliable anchorage in the jawbone.The drill includes a stop at 15 mm to prevent over-penetration.Total length: 33 mm Fitted with a standard dental shaftGraduation markings: 4-6-8-10-12-14 mm
The screwdriver blade for stainless steel micro screws has a length of 70 mm. The QUADRO profile prevents the screw from spinning and ensures a secure grip.This blade is compatible with INOX micro screws with diameters of Ø 1.0 mm and Ø 1.2 mm. Features a dental shaft and blue-white marking.
The screwdriver blade for stainless steel micro screws has a length of 30 mm. The QUADRO profile of the dev-os screws prevents the screw from spinning and ensures a secure grip.This blade is suitable for INOX micro screws with diameters of Ø 1.0 mm and Ø 1.2 mm. Features a dental shaft and blue-white marking.
The pilot drill 4212-10 is used to create pilot holes for dev-os stainless steel micro screws with a diameter of Ø 1.2 mm. The drill has a diameter of Ø 1.0 mm, making it slightly narrower than the screw to ensure secure anchorage in the jawbone.The drill features a built-in 10 mm stop to prevent over-drilling Total length: 25 mmEquipped with a standard dental shaft.Graduation: 4-6-8 mmSuitable for the following stainless steel micro screws:4512-044512-064512-084512-104512-124512-14
The pilot drill 4212-14 is used to create pilot holes for dev-os stainless steel micro screws with a diameter of Ø 1.2 mm. The drill has a diameter of Ø 1.0 mm, making it slightly narrower than the screw for secure anchorage in the jawbone. It features a stop at 15 mm to prevent over-drilling.Total length: 33 mmEquipped with a standard dental shaftGraduation markings: 4-6-8-10-12-14 mmSuitable for the following stainless steel micro screws:4512-044512-064512-084512-104512-124512-14
