Accessories | dev-os

The applicator (titanium end piece) facilitates easy removal of the pins from the box and direct attachment to the jaw. The straight applicator or titanium end piece is screwed onto the handle via the thread and can be easily replaced as needed. It comes with a protective cap and is suitable for 4902-00 F.

The applicator (Titan end piece) allows for convenient picking up of the pins from the box and direct attachment to the jaw. The curved applicator or titanium end piece is screwed onto the handle by the thread and can thus be easily replaced as needed.With protective cap suitable for 4902-00 FCurvedWith thread

The ROUND SOLID handle for the titanium end pieces provides excellent grip during pulling and pushing movements and ensures direct force transmission to the pin. It fits comfortably in the hand and is easy to clean.Length: 133 mmFor titanium end pieces 4902-10 / 4902-15

The dev-pin Pin Applicator provides a convenient way to pick up pins from the tool box and apply them directly to the jaw. With its dental attachment, the applicator is perfectly compatible with the dev-os hand driver. The straight titanium tip allows for precise handling, and the 50mm length provides an optimal reach.

The pin remover from the dev-pin system enables easy and gentle removal of pins from the jawbone. The working part is 4.0 mm wide (outer) and 1.0 mm wide (inner). The instrument in F-LINE SUPER LIGHT design has a total length of 165 mm.

With its very pointed working end, holes for pins can be pre-drilled in the membrane using the pin punch. The working part has a length of 2.5 mm. The instrument features the F-LINE ROUND SOLID design and has a total length of 170 mm.

The dev-pin pin box, made of stainless steel with a black coating, is the ideal storage solution for pins. The box can be easily opened with one hand and can hold up to 15 pins. Thanks to its robust coating, the box is scratch-resistant and particularly durable.For Ø 3 mm: 10 pcs / Ø 5 mm: 5 pcs.F-LINE DesignBLACK EDITION

The hammer is made of pure stainless steel and is used, for example, for driving pins. Its balanced weight distribution ensures ideal balance, making it comfortable to hold and allowing for controlled force transmission.It is first used with the pin punch 4902-80 F for pre-punching. The pin is then driven in using the pin applicator 4311-00 or 4902-20.Length: 16.5 cm, Weight: 125 g

The screwdriver handle with silicone grip is suitable for:Screwdriver bladesPin applicatorPin driverIt enables comfortable handling. The pressure point at the back is fixed, the silicone handle can be rotated - this makes it easier to tighten and loosen screws and pins. With dental attachment.The handle is suitable for the following diameters of the dev-os system:Ø 1.0 mmØ 1.3 mmØ 1.5 mmØ 1.8 mmApplication: Place the pressure point against the palm of your hand and turn the silicone handle using your fingers. This enables simple and reliable turning by hand.

The dev-pin HEX-HEAD pin remover allows for quick and easy removal of the HEX HEAD pins placed in the jaw after healing. With its straight titanium tip and the matching dental attachment for the handle 4311-00, the pin remover offers precise and comfortable handling. It is specifically designed for the removal of pins (Item No. 4901-13 & 4901-15).Length: 50 mmWorking part width: 0.9 mm

The hole punch according to Dr Henriette Lerner is used for targeted perforation (3 mm diameter) of membranes. It is used during immediate implant placement to position membranes over abutments.

The dev-pin TITAN HEX HEAD Pin Driver allows for quick and easy removal of HEX HEAD pins placed in the jaw after healing. The titanium endpiece is durable and reliable. The pin driver is specifically designed for the removal of pins (Art No. 4901-13 & 4901-15).

Inlay for the modular toolbox 4400-10 and the cube 4400-15 for titanium pins. The inlay for the bone fixation set is compatible with the following titanium pins: 4901-03 4901-05 4901-134901-15 4911-03 4911-13

Dental drill specifically designed for bleeding points. By gently perforating the surface of the bone, it creates access to the vascularized cancellous bone, thereby promoting osseointegration. The drill features a stop at 7 mm to prevent over-drilling.Total length: 25 mmEquipped with a standard dental shaft

The dev-os Pin Set is designed for the structured storage and presentation of instruments, applicators, accessories and titanium pins for surgical use. All components are clearly arranged in a washing tray and can be presented together during the procedure. The set facilitates orderly instrument organisation in the operating theatre, as well as the joint reprocessing and storage of the components it contains.Contents: 860-20 F hammer, 125 g4902-70 F pin remover 4902-80 F pin punch4902-00 F handle for pin applicators4902-10 Titanium tip for pin applicator, straight4902-15 Titanium tip for pin applicator, curved4902-55 Titanium hex-head pin driver, long 4902-50 Titanium hex-head pin driver, short4400-15 dev-os Cube for storing pins 4410-70 Toolbox inlay for titanium pins 9100-04 Washtray with lid and handle (180 × 130 × 35 mm) 9902-15 Rack