SURGERY

The scalpel handle 1151-75 F is double-ended and has distances of 1.5 mm and 2.0 mm. It is straight and suitable for 2 blades. The two blades enable a parallel cut in a single operation.

The suction cannula 2422 is made of corrosion-resistant stainless steel. It is used for safe suction. The suction cannula has a total length of 19.0 cm and a diameter of Ø 4.0 (outer diameter) / 3.0 mm (inner diameter) - the fine tip makes it particularly precise. The cannula can be sterilised due to the stainless steel and is therefore particularly sustainable.**No medical device

Mixing bowl for bone material with a volume of 25cc for preparing bone material mixtures. It has a diameter of Ø 60 mm.

The Williger raspatorium #1 with F-LINE SUPER LIGHT handle has a working part width of 5.0 mm and is slightly curved.Application: The raspatorium is used to push soft tissue away from the bone and loosen the periosteum.

The suction cannula 2425 is made of stainless steel. It ensures safe and precise suction due to its fine tip. The suction cannula has a total length of 14.0 cm and a diameter of Ø 4.0 (outer diameter) / 3.0 mm (inner diameter). As the cannula is made of stainless steel, it can be sterilised and is therefore particularly sustainable. It does not have a hole.**No medical device

The scalpel handle #3 1151-30 F features the devemed F-LINE SUPER LIGHT design - thus, it is nearly identical to the scalpel handle 1151-10 F, but it has a very lightweight handle. It is suitable for one blade and straight.

The raspatorium "Freer" #1 has two working ends with a width of 5.0 mm / 5.0 mm. The working ends are slightly curved, with one side sharp and one blunt. The raspatorium features the ergonomic and lightweight F-LINE SUPER LIGHT handle.Application: It is used to remove periosteum or soft tissue from the bone.

The "Halsey" needle holder, with its length of 13.5 cm, is a very compact model. Capable of using suture materials from 4-0 to 7-0, this instrument finds universal application in various surgical treatments, up to micro-surgery. The ring grip provides the surgeon with good control over the instrument, and the lock integrated into the rings allows the needle to be gripped and fixed at different stages. Tungsten carbide inserts give the instrument the necessary longevity of the jaws due to less wear compared to models without such inserts.

The cannula 2665-001 is suitable for the all-metal water syringe 2665. It features the Luer-Lock connection.

The "Goldman-Fox" gingivectomy scissors are curved and have a length of 13 cm.Application: The special SUPER CUT cutting edges ensure precision and control during the cutting process thanks to a sharp knife edge. The fine serration on the other cutting blade ensures that tissue is held securely.Note: The SUPER CUT scissors cannot be used for cutting wires, cartilage and other hard materials.

The raspatorium "Buser" #1 has a width of 4.0 mm / 4.0 mm at the working ends and features the ergonomic F-LINE SUPER LIGHT design.Application: The spear-shaped working part allows for precise detachment of papillae and loosening of the marginal gingival edge. Subsequently, the shovel-shaped opposite side can gently detach the mucoperiosteal flap.

The anatomical forceps has a length of 18 cm and is straight. The jaw features a transverse grooving.

The surgical curette "Lucas" #2R-2L 920-62 F is equipped with the devemed F-LINE SUPER LIGHT handle and is double-ended. The working ends are serrated and have a length of 3.3 mm / 3.3 mm. Application: Thanks to the serration, bone residues that would otherwise be difficult to remove can be gripped and loosened more easily. This curette is ideal for removing cysts. In addition, it causes slight bleeding, which supports improved healing.

The applicator (titanium end piece) facilitates easy removal of the pins from the box and direct attachment to the jaw. The straight applicator or titanium end piece is screwed onto the handle via the thread and can be easily replaced as needed. It comes with a protective cap and is suitable for 4902-00 F.

This surgical forceps "Semken" 2302-500 is 155 mm long and has a working part dimension of 1.5 mm. It is straight and features 1x2 serrations.

The surgical curette "Lucas" #0R-0L 920-60 F is equipped with the devemed F-LINE SUPER LIGHT handle and is double-ended.Application: The serration enables better gripping and loosening of bone residues that are otherwise difficult to remove. It is ideal for removing cysts. It also causes slight bleeding, which supports better healing. The surgical curette has working ends with a size of 1.8 mm / 1.8 mm.

The dev-pin TITAN Pins are top-notch instruments for securing titanium foils and membranes. The pins with a smooth head allow for secure fixation and can be easily removed using the pin remover (4902-70 F) after healing. The pins have a length of 3 mm and provide reliable fixation for your applications. The package includes 15 pins.

The raspatorium #I6 888-I6 F is an instrument from the F-LINE SUPER LIGHT series. The slightly curved working ends have a width of 7.0 mm / 4.0 mm.Application: The raspatorium is used to detach the periosteum and push the soft tissue away from the bone.

The "Hösel" needle holder has a total length of 21 cm. The particularly long handle branches create a large leverage effect, allowing the needle holder to be operated with little effort. The 2 mm thick jaw allows thread sizes from 2-0 to 4-0 to be used. In addition, the jaw is fitted with carbide inserts (TC inserts) to make it particularly resistant to abrasion and to hold the needle securely without twisting. Another special feature is the ratchet, which has been moved inwards to prevent the glove from becoming trapped. The spring of the instrument is located between the branches.

The blunt button probe in F-LINE SUPER LIGHT design has an overall length of 16.5 cm.The maxillary sinus probe is double-ended: Working end 1: Ø 1.5 mm / length 30.0 mm | Working end 2: Ø 1.0 mm / length 30.0 mm (slightly angled)Application: It is used to examine and palpate wounds and fistula canals without damaging the tissue. In dental surgery, the probe can be used to examine foreign bodies in wounds as well as wound cavities and fistulas for depth and direction. For example, after a tooth has been extracted, a connection may form between the oral cavity and the maxillary sinus in the upper jaw (posterior region) (e.g. if the root protrudes into the maxillary sinus) - this should be closed promptly to prevent inflammation.

The scalpel blade remover KLING-EX 1146-00 is used for the safe removal of scalpel blades.Application: To do this, the scalpel blade is clamped into the remover until it stops. Then, the remover is compressed, and the scalpel blade holder is carefully removed, leaving only the blade in the remover.

With aspiration arrow and hinged retainer, for solid plug, front part removable. Chromed Brass.

The scalpel blade 1145-115 #15 is sterilely packaged in individual packages - it is offered in packs of 100 pieces. The blade is made of rust-resistant and medical stainless steel. It features a small, curved cutting edge for short cuts - thus resembling the high-quality Swann Morton blade 1145-215.

The scalpel handle #3 in devemed F-LINE ROUND SOLID design is straight and suitable for one blade. It is equivalent to devemed scalpel handle 1151-30 F, but features a heavy ROUND SOLID handle.