MOUTH MIRRORS

The pointed chisel 2502-40 F with a width of 4.0 mm has been developed for the initial widening of the alveolar ridge. The sharply tapered tip allows for precise penetration into the bone - the graduated scale (6-8-10-12-14 mm) provides reliable control of the depth of widening. The instrument features the ergonomic devemed F-LINE ROUND SOLID handle.

Our straight bone spreader with a width of 4.0 mm is the ideal instrument for optimal opening and expansion of the jawbone after using a diamond disc or bone mill. The millimeter graduation with intervals of 8-10-12-14-16-18 ensures precise monitoring of the penetration depth. The instrument has a total length of 171 mm and features our F-Line design. With this bone spreader, you can achieve reliable results in bone preparations and augmentations.

Application: After using a diamond disc or a bone reamer, the sharp end of the chisel enables optimum opening and expansion of the alveolar ridge. The graduation at 2 mm intervals ensures precise monitoring of the penetration depth. The straight flat chisel (bone chisel) in the devemed F-LINE ROUND SOLID design has a width of 8 mm and a graduation of 8-10-12-14-16-18 mm.

The flat chisel 2501-98 F according to "Kramer-Nevins" with a width of 5.0 mm is straight and has a pointed working end. The chisel has the devemed F-LINE ROUND SOLID handle.Application: Thanks to the sharp tip of the chisel, the alveolar ridge can be optimally opened and expanded after using a diamond disc or a bone reamer. The graduation at 2 mm intervals enables precise monitoring of the penetration depth. Translated with DeepL.com (free version)

The angled bone chisel (flat chisel) enables precise monitoring of the penetration depth thanks to the graduation at 2 mm intervals (8-10-12-14-16-18 mm). The width of the working part is 4.0 mm. The sharp end of the chisel enables optimum opening and expansion of the alveolar ridge after using a diamond disc or a bone reamer.

The angled flat chisel with a width of 8.0 mm is ideal for larger bone preparations and augmentations. The graduation of 8-10-12-14-16-18 mm ensures precise control over the depth of penetration. The instrument features the ergonomic devemed F-LINE ROUND SOLID design.Application: With the sharp tip of the chisel, the alveolar ridge can be optimally opened and expanded after using a diamond disc or a bone reamer. The graduation at 2 mm intervals ensures precise control of the penetration depth.

The bone chisel 2502-60 F with a width of 6.0 mm is specifically designed for the initial widening of the alveolar ridge. With its sharp tip, it allows for precise penetration into the bone. The graduated scale 6-8-10-12-14 mm ensures accurate control of the depth of widening.

The pointed chisel with a width of 8.0 mm is an instrument for the initial widening of the alveolar ridge. Its sharp tip allows for precise penetration into the bone, and the graduated scale (6-8-10-12-14 mm) enables control of the depth of widening.

Bone spreader according to Dr. Vivas in a conical shape with graduation (6-8-10-12-14 mm). The tip has a diameter of Ø 0.5 mm, and the end of the working part has a diameter of Ø 3.8 mm.Application: By scoring the bone, the implant can be better screwed in. (No slipping or uneven insertion).

The bone spreader is used for widening the alveolar ridge to introduce bone material. It is flat, has a width of 3.5 mm, and is graduated as follows: 6-8-10-12-14 mm. The instrument is equipped with the devemed F-LINE ROUND SOLID design.

The bone spreader with a width of 5.0 mm is flat. It has been designed for widening the alveolar ridge, thereby facilitating the introduction of bone material. The spreader, in devemed F-LINE ROUND SOLID design, is graduated as follows: 6-8-10-12-14 mm.

The bone spreader 2506-70 F (F-LINE ROUND SOLID design) with a width of 7.0 mm is flat and suitable for widening the alveolar ridge. This widening allows for the introduction of bone material. The graduation of the bone spreader is marked in the following steps: 6-8-10-12-14 mm.

The bone spreader 2507-35 F with a width of 3.5 mm and an oval working end is an instrument for widening the alveolar ridge - this allows for the introduction of bone material. It is graduated (6-8-10-12-14 mm) and features the devemed F-LINE ROUDN SOLID design.

The bone spreader with a width of 5.0 mm is an instrument for the precise dilation of the alveolar ridge. This allows for the introduction of bone (substitute) material. The spreader in devemed F-LINE ROUND SOLID design is oval and graduated as follows: 6-8-10-12-14 mm.

The bone spreader is used to expand the jawbone to introduce bone material. It is graduated (6-8-10-12-14) and oval. The width is 7.0 mm. The bone spreader features the devemed F-LINE ROUND SOLID handle, which is designed for both pressure and traction, ensuring constant force transmission. The instrument is marked in black.

The alveolar ridge is prepared for bone spreading using either a rotating disc or a fine chisel. Subsequently, sagittal spreading of the alveolar ridge is performed using ellipsoid bone spreaders to maintain the implant site.Graduated at 5-6-7-8-9-10 mmWidth at the top: 1.6 mmWidth at the bottom: 2.2 mmStraightF-LINE PEAR HANDLEEspecially for the anterior tooth area

Application: The alveolar ridge is prepared for bone spreading using either a rotating disc or a fine chisel. To maintain the implant site, sagittal spreading of the alveolar ridge is carried out using ellipsoid bone spreaders. Particularly suitable for the anterior tooth area.Graduated: 5-6-7-8-9-10 mmF-LINE PEAR HANDLEStraight Width at the top: 2.2 mmWidth at the bottom: 2.8 mm

The bone spreader 2508-28 F is particularly suitable for the anterior tooth area. To prepare for bone spreading, the alveolar ridge is either prepared with a rotating disc or a fine chisel. The sagittal spreading of the alveolar ridge is then carried out using an ellipsoid bone spreader to maintain the implant site.Graduated scale: 5-6-7-8-9-10 mmWidth at the top: 2.8 mmWidth at the bottom: 3.4 mmStraightF-LINE PEAR HANDLE

The alveolar ridge is prepared for bone spreading using either a rotating disc or a fine chisel. To maintain the implant site, the alveolar ridge is processed through sagittal spreading using ellipsoid bone spreaders.Graduated at: 5-6-7-8-9-10 mmStraightEspecially for the anterior tooth areaWidth at the top: 3.4 mmWidth at the bottom: 4.0 mmF-LINE PEAR HANDLE

Suitable for the molar and premolar areas. Application: For bone spreading, the alveolar ridge is prepared with a rotating disc or a chisel. Subsequently, sagittal spreading of the alveolar ridge is performed using the ellipsoid bone spreader.Graduated: 5-6-7-8-9-10 mmBayonetWidth at the top: 1.6 mmWidth at the bottom: 2.2 mm

Application: For bone spreading, the alveolar ridge is prepared with a rotating disc / a fine chisel. To maintain the implant site, the alveolar ridge is spread using the ellipsoid bone spreader. The bone spreader 2509-22 F is suitable for the molar and premolar areas.Graduated at: 5-6-7-8-9-10 mmBayonetWidth at the top: 2.2 mmWidth at the bottom: 2.8 mmF-LINE PEAR HANDLE

For bone spreading, the alveolar ridge is prepared either with a rotating disc or a fine chisel. To maintain the implant site, the alveolar ridge is prepared through sagittal spreading using ellipsoid bone spreaders. The bone spreader 2509-28 F is suitable for the molar and premolar areas.Graduation: 5-6-7-8-9-10BayonetF-LINE PEAR HANDLEWidth at the top: 2.8 mmWidth at the bottom: 3.4 mm

The alveolar ridge is prepared for bone spreading using a rotating disc or a fine chisel. To maintain the implant site, sagittal spreading of the alveolar ridge is performed using ellipsoid bone spreaders. The bone spreader 2509-34 F is suitable for the molar and premolar areas.Graduation: 5-6-7-8-9-10 mmBayonetF-LINE PEAR HANDLEWidth at the top: 3.4 mmWidth at the bottom: 4.0 mm

Bone chisel attachment "Palti"Straight4 mm78 mmGraduated: 8-10-12-14-16-18