Needle holder "Halsey" | 4-0 - 7-0 | straight | ring handle | tungsten carbide | 135 mm
The "Halsey" needle holder, with its length of 13.5 cm, is a very compact model. Capable of using suture materials from 4-0 to 7-0, this instrument finds universal application in various surgical treatments, up to micro-surgery. The ring grip provides the surgeon with good control over the instrument, and the lock integrated into the rings allows the needle to be gripped and fixed at different stages. Tungsten carbide inserts give the instrument the necessary longevity of the jaws due to less wear compared to models without such inserts.
Needle holder "Hösel" | 2-0 - 4-0 | straight | 2.0 mm jaw | ratchet | tungsten carbide | 210 mm
The "Hösel" needle holder has a total length of 21 cm. The particularly long handle branches create a large leverage effect, allowing the needle holder to be operated with little effort. The 2 mm thick jaw allows thread sizes from 2-0 to 4-0 to be used. In addition, the jaw is fitted with carbide inserts (TC inserts) to make it particularly resistant to abrasion and to hold the needle securely without twisting. Another special feature is the ratchet, which has been moved inwards to prevent the glove from becoming trapped. The spring of the instrument is located between the branches.
Needle holder "Mayo-Hegar" | 2-0 - 4-0 | straight | ring handle | tungsten carbide | 160 mm
The "Mayo-Hegar" model with an overall length of 160 mm, which is popular in many dental practices, offers versatile use for surgical sutures in a wide range of treatment procedures. This length also allows work in the posterior areas of the oral cavity. The ring handle not only sits comfortably in the hand, but also gives the practitioner easy control over the instrument. The lock can be adjusted in stages and can be easily released again if required. Carbide inserts give the needle a good grip in the mouth and extend the service life of the instrument compared to needle holders without such inserts. Thread sizes from 2-0 to 4-0 can be easily processed with this model.
Needle holder "Mathieu" | 2-0 - 4-0 | straight | slim jaw | ratchet carbide | 140 mm
This model "Mathieu" in 14 cm length has a slim jaw compared to the models with standard working end. The tungsten carbide inserts (TC inserts) are cross-ribbed and allow the use of suture material from 2-0 to 4-0. These inserts considerably extend the service life of the instrument compared to models without them. The 14 cm version is the smaller version in the series, which is particularly suitable for smaller hands. Between the branches of the handle there is both a rotation lock for step-adjustable engagement function and the spring mechanism for holding open when the instrument is not in use.
Needle holder "Mathieu-Metzenbaum" | curved | 140 mm
Needle holder "Mathieu-Metzenbaum"14 cmCurved TCRotary catch
Needle holder "Mathieu" | 2-0 - 4-0 | straight | ratchet | carbide | 140 mm
This needle holder, named after its inventor "Mathieu", has a branch handle with a ratchet and spring in between. The jaw is fitted with carbide inserts (TC inserts) in standard size and cross grooving, which allow the use of thread sizes from 2-0 to 4-0. At 140 mm, this model is the shorter version of this series, making it particularly suitable for smaller hands.
Micro needle holder "Barraquer" | 5-0 - 8-0 | curved | 0.8 mm | with ratchet | 150 mm | F-LINE
The Barraquer micro needle holder with a jaw thickness of 0.8 mm in a curved design is ideally suited for microsurgical treatments with suture thicknesses between 5-0 and 8-0. The ratchet allows the needle holder to be locked in place, thus ensuring a secure grip of the needle and preventing it from twisting. Its curved shape enables suturing even in inaccessible areas. The "pivot-curved" closure prevents the suture material from getting caught or torn off at the end of the instrument, while the round handle ensures easy handling. Its hard metal inserts (TC inserts) ensure a long service life with a reliable grip of the needle. This needle holder comes in the aesthetic F-LINE ROUND SOLID design. With a total length of 150 mm, this microneedle holder is one of the shorter versions in this series.
Needle holder "Mathieu-Olsen" | 2-0 - 4-0 | straight | with scissors | ratchet | tungsten carbide | 165 mm
The "Mathieu-Olsen" needle holder, with a length of 16.5 cm, is a multifunctional instrument distinguished by its integrated scissors. This feature allows the thread to be cut after knotting without the need to switch instruments. The circumferential lock allows for comfortable adjustment of the desired needle tension. It has been displaced inward to prevent glove entrapment. The double-spring mechanism makes the instrument smoothly operable during closure and automatically opens the jaws when no force is applied to the handle. This needle holder is suitable for suture sizes from 2-0 to 4-0 and is equipped with TC (Tungsten Carbide) inserts for durability and friction when holding the needle.
Needle holder "Derf" | 2-0 - 4-0 | straight | ring handle | carbide | 120 mm
The needle holder, named after its inventor "Derf", has a total length of 12 cm, which makes it very compact. The ring handle makes the needle holder comfortable to handle. The instrument has hard metal inserts (TC inserts) for secure gripping of the needle without it twisting, which also increase durability by reducing abrasion. This jaw allows working with suture material from 2-0 to 4-0. There is also a lock between the rings, which allows the needle to be fixed in the working part.
Micro needle holder "Barraquer" | 5-0 - 6-0 | curved | 1.2 mm | with ratchet | 150 mm | F-LINE
The Barraquer micro needle holder with ratchet is particularly suitable for periodontal surgery. It enables minimally traumatic and minimally invasive suturing, which is frequently used for free mucosal transplants and shifting flaps in the apical and lateral region. The curved shape makes it easy to reach areas that are more difficult to access and increases the flexibility of the area of application. The "pivot-curved" closure prevents the suture material from getting caught in the instrument and tearing off, while the round handle ensures easy handling. Recommended for thread sizes 5-0 to 6-0 with a jaw thickness of 1.2 mm. The micro needle holder comes in the F-LINE ROUND SOLID design and is equipped with carbide inserts (TC inserts) in the jaws. With its length of 150 mm, this micro needle holder is one of the shorter versions. Due to this length, it is often popular with practitioners with smaller hands. Compared to Castroviejo micro needle holders, for example, the Barraquer micro needle holders are characterized by the external spring, which means that the actual handle length is shorter and the instrument is therefore lighter overall compared to a Castroviejo needle holder of comparable length.
Micro needle holder "Barraquer" | 5-0 - 6-0 | straight | 1.2 mm | with ratchet | 171 mm | F-LINE
With a width of 1.2 mm at the tip of the jaw, this Barraquer micro needle holder is the widest version in this series. The needle holder is equipped with an internal rotation lock to ensure that the needle is held securely with a latching function. At the same time, there are carbide inserts (TC inserts) in the working part, which give the instrument a particularly long service life.Application: Due to the fine working part compared to standard needle holders, the micro needle holder is designed for the use of 5-0 and 6-0 suture material and is therefore ideally suited for periodontal surgery. With the "pivot-curved" closure, the suture material remains securely in the instrument without tearing or snagging, while the round handle of the F-LINE ROUND SOLID design ensures easy handling and balanced weight distribution. The 171 mm overall length not only ensures that this instrument can also be used in deep oral regions, but also that the needle holder can be easily accommodated in washtrays.
Micro needle holder "Castroviejo" | 4-0 | straight | 2.2 mm | with ratchet | 150 mm | F-LINE
The Castroviejo-Genon micro needle holder is designed to be very robust with its 2.2 mm thickness at the jaw tip, which makes it suitable for suture material with a 4-0 thickness. This makes it the micro needle holder that can hold the thickest suture material compared to the others. A total length of 150 mm makes it particularly manageable for smaller hands. The ratchet fixes the needle firmly between the hard metal inserts (TC inserts) inserted in the jaw, which makes twisting of the needle and further application of force by hand unnecessary. The inwardly installed spring prevents damage to the glove and ensures a solid grip over the entire length. This comes in the F-LINE ROUND SOLID design, which, in addition to its attractive appearance, also ensures a balanced weight ratio. The "pivot-curved" closure ensures that the thread does not snag or break when the sling is knotted.
Needle holder "De Bakey" | 4-0 - 6-0 | straight | ring handle | tungsten carbide | 160 mm
Application: The "De Bakey" needle holder is suitable for suture material from 4-0 to 6-0, which also makes it suitable for microsurgical procedures. With a length of 16 cm, it is in the medium range. The ring handle gives the surgeon good control over the instrument. Compared to other needle holders, the mail runs parallel and is fitted with carbide inserts (TC insert). This provides the necessary support for the needle in the mouth and protects the instrument from rapid wear. Between the rings of the handle there is an adjustable ratchet, which allows the needle to be held in the mouth without the need for additional force and can be easily released again.
Needle holder "Mathieu" | 2-0 - 4-0 | straight | ratchet | carbide | 170 mm
The "Mathieu" needle holder in 17 cm length with straight jaw and rotation lock is suitable for use with suture material from 2-0 to 4-0. The carbide insert (TC insert) with cross grooving is standard size and gives the instrument a longer service life than comparable needle holders without such inserts. They also provide the necessary grip on the needle to prevent it from twisting. This model is the larger version from the series with standard carbide inserts. A spring is installed between the branches of the handle, which means that the needle holder opens automatically if no force is applied to the handle.
Needle holder "Mathieu" | 2-0 - 4-0 | straight | slim jaw | ratchet | tungsten carbide | 170 mm
The 17 cm version of the "Mathieu" needle holder is well suited for sewing work in the back of the oral cavity due to its length. This instrument is from the range of needle holders with a slim mouth. It is equipped with carbide inserts (TC inserts) for a long service life and a firm grip on the needle to prevent it from twisting. The rotation lock then fixes the needle in position. A spring is also fitted between the branches to ensure that the needle holder opens automatically. This needle holder is suitable for thread sizes from 2-0 to 4-0.
Needle holder "Mayo-Hegar" | 2-0 - 4-0 | straight | ring handle | tungsten carbide | 140 mm
This model from the "Mayo-Hegar" range is the shortest version at 140 mm. The ring handle on the instrument makes it particularly easy to handle. Carbide inserts (TC inserts) give the instrument the necessary durability and secure grip of the needle in the jaw, which prevents it from twisting. The needle holder is suitable for suture material from 2-0 up to 4-0. The lock between the rings of the handle allows the needle holder to be fixed in stages and released easily. This instrument is an all-rounder for surgical suturing work and is one of the most frequently used needle holders in surgical practices.
Needle holder "Mayo-Hegar" | 3-0 - 4-0 | straight | ring handle | tungsten carbide | 180 mm
With its total length of 180 mm, this needle holder from the "Mayo-Hegar" series is one of the longer versions, allowing good accessibility to the posterior areas of the oral cavity with good visibility at the same time. The ring handles allow comfortable working and easy guidance of the instrument during the operation. The ratchet, which is responsible for engaging the needle holder, is located between the rings of the handle. This allows the needle to be fixed in position in the carbide-covered jaw. The needle holder is designed for working with suture material from 2-0 to 4-0.
Needle holder "Mayo-Hegar" | 2-0 - 4-0 | straight | ring handle | tungsten carbide | 200 mm
At 200 mm, this model is the longest version in the "Mayo-Hegar" range. The long lever created by the length of the handle makes it easy to operate the needle holder. In combination with the ring handle, the instrument is very comfortable to use and is particularly suitable for use in the posterior areas of the mouth. The carbide inserts used in the jaws ensure durability and a good hold of the needle in the jaws. Thread thicknesses from 2-0 to 4-0 can be processed with this instrument. The ratchet is located between the rings of the handle to allow the needle to be fixed in stages.
Needle holder "Lichtenberg-Ryder" | 3-0 - 4-0 | straight | 1.5 mm | ratchet | 165 mm
The needle holder "Lichtenberg-Ryder" in 16.5 cm length with a straight jaw of 1.5 mm diameter and double spring is an instrument for holding surgical suture material and surgical needles. The jaws are fitted with carbide inserts to give the needle holder a long service life. It allows precise holding and fixation of needles during surgery and is suitable for suture thicknesses 3-0 - 4-0. The special internal circulation lock prevents the glove from being damaged. The curved edges in the area of the jaw prevent the thread from breaking off due to snagging.
Needle holder "Lichtenberg-Ryder" | 3-0 - 4-0 | curved | 1.5 mm | ratchet | tungsten carbide | 165 mm
The "Lichtenberg-Ryder" is a needle holder with a branch handle measuring 165 mm in total length. An inward-offset lock prevents glove damage during treatment and allows the needle holder to lock at various stages. The lock is released by further squeezing the branches. This feature keeps the needle in position and prevents it from twisting during stitching and guiding. Additionally, there is a double spring between the branches, providing a good tactile feel for closing the needle holder as it has no friction points on the instrument and is easier to operate than a single spring design. This model has a curved tip, making it possible to work in hard-to-reach areas. The tungsten carbide inserts used improve durability and provide the necessary friction to hold the needle. The needle holder has rounded edges at the closure to prevent snagging or tearing of the suture material. This model is suitable for thread sizes 3-0 and 4-0.
Needle holder "Crile-Wood" | 2-0 - 4-0 | straight | ring handle | tungsten carbide | 150 mm
The "Crile-Wood" needle holder, measuring 15 cm in length, is a model frequently used in surgical practices. It is distinguished by its compact design and its relatively long jaws, which are equipped with tungsten carbide inserts. The ring grip allows for comfortable handling and easy opening and closing of the instrument. The accompanying lock provides various gradations for needle fixation. The pyramid-shaped imprint of the tungsten carbide inserts offers good needle hold and increased durability for the instrument. With its straight jaws, it is a proven tool for surgical sutures ranging from sizes 2-0 to 4-0, making it suitable for coarser sutures.
Needle holder "Crile-Wood" | 2-0 - 4-0 | straight | ring handle | carbide | 180 mm
This model represents the longer version of the "Crile-Wood" needle holder, measuring 180 mm. This length allows for better reach into the posterior areas of the oral cavity. It is also designed for suture sizes ranging from 2-0 to 4-0. The longer branches make it easier to close the jaws thanks to the longer leverage. The ring grips also facilitate easy opening of the needle holder. The lock mechanism allows for adjustment of the force applied to the needle. Tungsten carbide inserts ensure a firm hold on the needle and contribute to longevity by minimizing wear and tear.
Micro needle holder "Barraquer" | 5-0 - 6-0 | curved | 1.2 mm | with ratchet | 171 mm | F-LINE
The Barraquer micro needle holder with a length of 171 mm is particularly suitable for periodontal procedures thanks to its fine jaw. The built-in ratchet allows the instrument to engage and lock in place to fix the needle at the working end. Its curved shape makes it possible to work in hard-to-reach areas of the oral cavity and offers optimum flexibility for many areas of application. Due to the fine suture material that can be used with this needle holder, minimally invasive suturing and low tissue trauma are possible. The "pivot-curved" closure prevents suture material from getting caught during suturing. The F-LINE ROUND SOLID design gives the instrument an aesthetic appearance on the one hand and a good weight for comfortable holding during treatment on the other. Thread sizes from 5-0 to 6-0 are recommended for this micro needle holder. The jaw thickness is 1.2 mm, making this needle holder the widest version in this series. Hard metal inserts (TC inserts) are installed in the working end for a particularly long service life.
Micro needle holder "Barraquer" | 5-0 - 8-0 | straight | 0.8 mm | with ratchet | 150 mm | F-LINE
The Barraquer micro needle holder with a 0.8 mm wide jaw represents the medium jaw width from this series. The ratchet is suitable for optimally fixing the needle in the working end and preventing the needle from twisting. This micro needle holder is therefore very suitable for periodontal surgery. Its straight shape allows the needle to be held in the same position without rotating the needle holder. The pivot-curved closure prevents the suture material from catching and tearing off the instrument and enables smooth gliding along the end that connects the two halves of the needle holder. The F-LINE ROUND SOLID handle not only looks good, but also gives the instrument a good balance in the hand. The fine micro needle holder is recommended for thread sizes 5-0 to 8-0. The carbide inserts (TC inserts) give the instrument durability and a good grip on the needle.
Needle Holders for All Dental Surgery Applications
Explore our diverse selection of needle holders, specifically designed for the precise demands of dental surgery. Our "Needle Holders" category provides high-quality instruments essential for the safe and effective handling of needles during dental suturing and other surgical procedures.
In this range, you will find:
- Micro Needle Holders: Ideal for the finest surgical tasks and precise suturing techniques in microsurgery. Our micro needle holders are specially designed for handling very small needles, allowing for exact control and stability. They are perfectly suited for delicate procedures where precision is crucial. This selection is particularly popular for periodontal procedures, where very fine suture material is used.
- Standard Needle Holders: These are intended for general use in dental surgery and offer durability and reliability for a wide range of suturing applications. Standard needle holders are available in various lengths and handle configurations to meet the needs of all dental professionals.
Each needle holder in our assortment is made from high-quality materials to ensure longevity and reliable function. They are designed to maximize user comfort and ergonomics, allowing for precise and fatigue-free application. The specially developed gripping surfaces ensure a firm hold on the needle, while the precise mechanics guarantee a smooth and controlled needle movement.
