Accessories

The applicator (titanium end piece) facilitates easy removal of the pins from the box and direct attachment to the jaw. The straight applicator or titanium end piece is screwed onto the handle via the thread and can be easily replaced as needed. It comes with a protective cap and is suitable for 4902-00 F.

The applicator (Titan end piece) allows for convenient picking up of the pins from the box and direct attachment to the jaw. The curved applicator or titanium end piece is screwed onto the handle by the thread and can thus be easily replaced as needed.With protective cap suitable for 4902-00 FCurvedWith thread

The dev-pin Pin Applicator provides a convenient way to pick up pins from the tool box and apply them directly to the jaw. With its dental attachment, the applicator is perfectly compatible with the dev-os hand driver. The straight titanium tip allows for precise handling, and the 50mm length provides an optimal reach.

The pin remover from the dev-pin system enables easy and gentle removal of pins from the jawbone. The working part is 4.0 mm wide (outer) and 1.0 mm wide (inner). The instrument in F-LINE SUPER LIGHT design has a total length of 165 mm.

The ROUND SOLID handle for the titanium end pieces provides excellent grip during pulling and pushing movements and ensures direct force transmission to the pin. It fits comfortably in the hand and is easy to clean.Length: 133 mmFor titanium end pieces 4902-10 / 4902-15

With its very pointed working end, holes for pins can be pre-drilled in the membrane using the pin punch. The working part has a length of 2.5 mm. The instrument features the F-LINE ROUND SOLID design and has a total length of 170 mm.

The screwdriver handle with silicone grip is suitable for:Screwdriver bladesPin applicatorPin driverIt enables comfortable handling. The pressure point at the back is fixed, the silicone handle can be rotated - this makes it easier to tighten and loosen screws and pins. With dental attachment.The handle is suitable for the following diameters of the dev-os system:Ø 1.0 mmØ 1.3 mmØ 1.5 mmØ 1.8 mmApplication: Place the pressure point against the palm of your hand and turn the silicone handle using your fingers. This enables simple and reliable turning by hand.

The dev-pin HEX-HEAD pin remover allows for quick and easy removal of the HEX HEAD pins placed in the jaw after healing. With its straight titanium tip and the matching dental attachment for the handle 4311-00, the pin remover offers precise and comfortable handling. It is specifically designed for the removal of pins (Item No. 4901-13 & 4901-15).Length: 50 mmWorking part width: 0.9 mm

The hole punch according to Dr Henriette Lerner is used for targeted perforation (3 mm diameter) of membranes. It is used during immediate implant placement to position membranes over abutments.

The dev-pin TITAN HEX HEAD Pin Driver allows for quick and easy removal of HEX HEAD pins placed in the jaw after healing. The titanium endpiece is durable and reliable. The pin driver is specifically designed for the removal of pins (Art No. 4901-13 & 4901-15).

Dental drill specifically designed for bleeding points. By gently perforating the surface of the bone, it creates access to the vascularized cancellous bone, thereby promoting osseointegration. The drill features a stop at 7 mm to prevent over-drilling.Total length: 25 mmEquipped with a standard dental shaft