The "Langenbeck" 965-3 retractor has a length of 215 mm and is bent downwards. The working part is 40 mm long and 11 mm wide.
The "Langenbeck" 965-4 retractor has an overall length of 215 mm and is bent downwards. The working part has a length of 50 mm and a width of 11 mm.
The wound hook 969-99 "Ramus-Obwegeser" is an instrument with dimensions of 70 mm (length) x 11 mm (width) and a total length of 220 mm. It is curved downwards.Application: The retractor or wound hook is ideally suited for sagittal mandibular osteotomy.
The wound hook "Emos" in devemed F-LINE SUPER LIGHT design has a length of 171 mm and features a working part width of 8 mm and a working part length of 20 mm.Application: The double-angled retractor is used for targeted visualization of the surgical area.
The cheek and lip retractor or wound hook "Middeldorpf" has a total length of 215 mm and a working part size of 20 mm / 22 mm. It is used, for example, for retracting mucoperiosteal flaps, the cheeks, lips, or tongue.
This vestibular hook ensures that you can hold the lip in the lower jaw and upper jaw with one hand. can be held off. During the application a clear surgical field is kept free. The lip holder is therefore also suitable for photographic documentation.
The cheek retractor "University of Cawood-Minnesota" is serrated and has a length of 150 mm and a width of 20 mm.Application: This extremely lightweight cheek retractor was originally developed for hard-to-reach areas in the mouth. Due to its special features, it is commonly used in open curettage procedures.
The wound hook 969-90 "Müller" has a total length of 220 mm. The working end has a width of 7.5 mm at the front and 11.0 mm at the back, with a length of 55.0 mm.
The double-angled retractor is used for targeted visualization of the surgical area. It has a total length of 150 mm.Working part 1: Width at the top: 19.5 mm | Width at the middle: 12.5 mm | Length: 26.0 mmWorking part 2: Width at the top: 10.5 mm | Width at the middle: 5.8 mm | Length: 20.0 mm
The 999-6 "devemed" retractor is an instrument used in surgery for precise tissue retraction and vision enhancement. The curved end of the retractor allows for smooth and controlled retraction of tissue, resulting in improved visibility during surgical procedures.
Cheek retractor "University of Cawood-Minnesota" with a length of 155 mm has a width of 20 mm.Application: This very lightweight cheek retractor was originally developed for hard-to-reach areas in the mouth. It is commonly used in open curettage procedures.
Cheek and tongue retractorWith saliva ejectorCannula leftDouble
Cheek and tongue retractorwith saliva ejectorCannula rightDouble
The cheek and tongue retractor 998-30 "Bishop" is an instrument used in dental surgery. It is used to retract the cheeks and tongue, thereby providing optimal visibility of the surgical area. It features an oval (width 24 mm / 11 mm) and a straight working end (width 23 mm) and has an angled shape.
The flexible retractor 964-2 has a length of 200 mm and a width of 15 mm. Thanks to its flexibility, the practitioner can customise the retractor to the patient or the treatment situation during surgical procedures.
The flexible retractor 964-3 has a total length of 200 mm and a width of 20 mm. Thanks to its flexibility, the retractor can be customised for surgical procedures.
The retractor "Langenbeck" 965-1 is 215 mm long and bent downwards. The working part has a length of 30 mm and a width of 11 mm.
The "Langenbeck" retractor 965-2 has an overall length of 215 mm and is bent downwards. The working end is 30 mm long and 16 mm wide.
The retractor "Kocher-Langenbeck" #1 968-1 is bent downwards and has an overall length of 215 mm. The working part has a length of 55 mm and a width of 11 mm.
The retractor "Kocher-Langenbeck" #1 968-2 has a total length of 215 mm, a length of 40 mm and a width of 11 mm at the working part. The instrument is bent downwards.
The "Obwegeser" retractor 968-3 has a total length of 215 mm and is slightly bent upwards. The working part has a length of 40 mm and a width of 11 mm.
The "Obwegeser" 968-4 retractor has an overall length of 215 mm - the working part is 55 mm long and 11 mm wide. It is slightly bent upwards.
The "Kocher-Langenbeck #2" retractor has a total length of 215 mm and a working part with a length of 55 mm and a width of 11 mm. The retractor is bent downwards.
The wound hook "Kocher-Langenbeck" #2 969-30 has a length of 215 mm and is bent downwards. The working end is 35 mm long and 11 mm wide.
Retractors and retractors
The instruments in this category are designed to improve visibility and access to the surgical field by holding soft tissue safely and gently. Our retractors and retractors are available in different sizes to provide optimal customization for specific application needs.
We offer instruments named after well-known authors such as Langenbeck, Kocher, Obwegeser, Müller or Farabeuf. These models are established and well-known in dentistry due to their longevity. In addition to the standard designs, models with upward curved tips are available to provide improved access and visibility in certain surgical situations.
Depending on your preference and the requirements of the procedure, you can choose between single-ended and double-ended instruments to allow flexibility of use. Our selection includes specialized cheek retractors such as those named after Middeldorpf, Minnesota and Cawood-Minnesota, which are specifically designed for retraction and stabilization of the cheeks during dental procedures. These instruments are very useful for retraction and stabilization of the vestibule and tongue during surgical procedures to ensure clear vision and safe access.
Depending on the specific needs of the procedure, we offer both smooth and serrated models to allow customization to the nature of the soft tissue or exposed bone and the requirements of the surgery. For maximum flexibility and adaptability to different surgical situations, we carry bendable retractors that can be customized according to the patient's anatomy.
