dev-os | Ø 1.0 mm | Microscrew INOX (stainless steel) | 3 pieces
The dev-os microscrews | INOX were consistently engineered to meet the specific demands of dental augmentation and demonstrate their particular strengths in the shell technique for fixation of cortical bone plates. A key factor is the high mechanical strength of the implant-grade stainless steel used. This material enables the production of screws with a diameter of just 1.0 mm and lengths of up to 14 mm while maintaining the necessary bending resistance and torsional stability. In this dimension, comparable titanium solutions are structurally limited, as very slender and simultaneously long screws made of titanium carry an increased risk of deformation or head fracture. The combination of a slim diameter and extended length allows reliable three-dimensional stabilization of bone plates, even in large augmentation volumes. Two thread diameters (1.0 mm and 1.2 mm) provide additional flexibility with regard to bone quality and the desired level of primary stability. In addition to its high mechanical strength, stainless steel offers a further clinical advantage: its intentionally low osseointegration allows even long screws to be removed in a controlled manner with moderate torque after the healing phase. This enhances safety during the second-stage procedure and reduces the risk of screw head fracture. The proven QUADRO screw head ensures form-fit torque transmission, prevents stripping, and enables precise and secure handling within the surgical field. The dev-os microscrews | INOX therefore represent maximum stability at minimal diameter and a practice-oriented system specifically tailored to the requirements of modern augmentation techniques. The dev-os INOX (stainless steel) micro screws 4510-XX have a diameter of Ø 1.0 mm. The following lengths are available (please select above):4510-04: Length: 4 mm | Diameter: Ø 1.0 mm4510-06: Length: 6 mm | Diameter: Ø 1.0 mm4510-08: Length: 8 mm | Diameter: Ø 1.0 mm4510-10: Length: 10 mm | Diameter: Ø 1.0 mm4510-12: Length: 12 mm | Diameter: Ø 1.0 mm4510-14: Length: 14 mm | Diameter: Ø 1.0 mmLike all devemed screws, the INOX micro screws feature the proven QUADRO screw head – this prevents the screw from spinning and improves the grip of the screwdriver. This ensures secure pickup and precise placement of the screw. They are sold in packs of 3.Compatible with the following accessories:Screwdriver blades 4210-30 (70 mm) & 4210-31 (30 mm) (requires handle 4311-00)Pilot drills 4210-10 (Ø 0.8 mm x 10 mm; gradations 4-6-8) & 4210-14 (Ø 0.8 mm x 14 mm; gradations 4-6-8-10-12-14)Inlay 4410-30 for modular toolbox 4400-10
dev-os | Ø 1.3 mm | Titan Mirco Screws | 5 pieces
The QUADRO titan micro screws 4013-XX have a diameter of Ø 1.3 mm. They are available in the following lengths (please select above):4013-05: Length: 5 mm | Diameter: Ø 1.3 mm4013-07: Length: 7 mm | Diameter: Ø 1.3 mm 4013-09: Length: 9 mm | Diameter: Ø 1.3 mm4013-11: Length: 11 mm | Diameter: Ø 1.3 mm4013-13: Length: 13 mm | Diameter: Ø 1.3 mm 4013-15: Length: 15 mm | Diameter: Ø 1.3 mmThe screw head with the slightly conical Quadro profile prevents the screw from spinning and ensures a better grip on the screwdriver. This ensures secure pick-up and placement. The screws are yellow in colour. They are sold in packs of 5.The dev-os QUADRO screwdriver blades 4213-20 and 4213-21 are suitable for this purpose
dev-os system 1.0 Ø | QUADRO Screwdriver blade | short | 30 mm | with dental fitting
The screwdriver blade for Ø 1.0 mm QUADRO TITAN micro-screws is available in a length of 30 mm. The QUADRO profile ensures a reliable fixation and prevents the screw from slipping. This blade is compatible with screw systems of Ø 1.0 mm diameter and enables precise work. Without color marking, with dental attachment.
dev-os | Ø 1.0 mm | Pilotdrill | 15 mm Stop | with dental fitting
The drill 4213-00 is used to perform pre-drilling for dev-os QUADRO TITAN micro-screws with a diameter of Ø 1.3 mm. The pilot drill has a diameter of Ø 1.0 mm. The diameter is slightly narrower than the titanium screw to ensure a secure hold in the jaw.The drill is graduated (5-7-9-11-13 mm) and has a stop at 15 mm to prevent drilling too deep. The total length is 33 mm. With standardized dental attachment.
dev-os-system | Screwdriver
The screwdriver handle with silicone grip is suitable for:Screwdriver bladesPin applicatorPin driverIt enables comfortable handling. The pressure point at the back is fixed, the silicone handle can be rotated - this makes it easier to tighten and loosen screws and pins. With dental attachment.The handle is suitable for the following diameters of the dev-os system:Ø 1.0 mmØ 1.3 mmØ 1.5 mmØ 1.8 mmApplication: Place the pressure point against the palm of your hand and turn the silicone handle using your fingers. This enables simple and reliable turning by hand.
dev-os | 30 mm | Ø 1.3 mm / 1.5 / 1.8 mm | QUADRO Screwdriver blade | short | with dental fitting
The QUADRO screwdriver blade is available in a compact length of 30 mm. The QUADRO profile provides a secure hold and prevents the screw from spinning.This blade is suitable for screw systems with Ø 1.3 mm, Ø 1.5 mm and Ø 1.8 mm diameters. Without colour coding.
dev-os | Ø 0.7 mm | Pilotdrill | 7 mm Stop | with dental fitting
The pilot drill 4210-00 is used to perform pre-drilling for the dev-os QUADRO TITAN micro-screws with a diameter of Ø 1.0 mm. The pilot drill has a diameter of Ø 0.7 mm - it is therefore slightly narrower than the titanium screw to ensure a secure hold in the jaw.The drill has a stop at 7 mm to prevent drilling too deep. The total length is 40 mm. With standardized dental attachment.
dev-os | Ø 1.2 mm | Pilotdrill | 15 mm Stop | with dental fitting
The drill bit 4215-00 is used to perform pre-drilling for the dev-os QUADRO TITAN micro-screws with a diameter of Ø 1.5 mm. The pilot drill has a diameter of Ø 1.2 mm, which is slightly smaller than the titanium screw, to ensure a secure hold in the jaw. It is graduated (5-7-9-11-13 mm) and has a stop at 15 mm to prevent over-drilling. The total length is 33 mm. With standardized dental attachment.
dev-os | Ø 1.5 mm | Pilotdrill | 15 mm Stop | with dental fitting
The drill bit 4218-00 is used for pre-drilling for the dev-os QUADRO TITAN micro-screws with a diameter of Ø 1.8 mm. The pilot drill has a diameter of Ø 1.5 mm, which is slightly smaller than the titanium screw, ensuring a secure hold in the jaw. It is graduated (5-7-9-11-13 mm) and has a stop at 15 mm to prevent over-drilling. The total length is 33 mm. With standardized dental attachment.
dev-os | Ø 1.5 mm | Titan Mirco Screws | 5 pieces
The QUADRO titan micro screws 4015-XX have a diameter of Ø 1.5 mm and are available in different lengths (please select above):4015-05: Length: 5 mm | Diameter: Ø 1.5 mm4015-07: Length: 7 mm | Diameter: Ø 1.5 mm4015-09: Length: 9 mm | Diameter: Ø 1.5 mm4015-11: Length: 11 mm | Diameter: Ø 1.5 mm4015-13: Length: 13 mm | Diameter: Ø 1.5 mm4015-15: Length: 15 mm | Diameter: Ø 1.5 mmThe screw head with the slightly conical Quadro profile prevents the screw from spinning and ensures a better grip on the screwdriver. This ensures secure pick-up and placement. The screws are available in ‘original grey’ and are sold in packs of 5.
dev-os | Ø 1.0 mm | Titan Mirco Screws | 5 pieces
The QUADRO titan micro screws 4010-XX have a diameter of Ø 1.0 mm. The following lengths are available (please select above):4010-05: Length: 5 mm | Diameter: Ø 1.0 mm4010-07: Length: 7 mm | Diameter: Ø 1.0 mm4010-09: Length: 9 mm | Diameter: Ø 1.0 mmThe screw head with a slightly conical Quadro profile prevents the screw from spinning and improves the grip of the screwdriver. This ensures that the screw is picked up and placed securely. The screws are green anodised. They are sold in packs of 5. Can be used in combination with the dev-os QUADRO screwdriver blades 4210-20 and 4210-21
dev-os | 70 mm | Ø 1.3 / 1.5 / 1.8 mm | QUADRO Screwdriver blade | long | with dental fitting
This screwdriver blade offers you the optimal solution for implantology. With a length of 70 mm, it is particularly long. The QUADRO profile prevents the screw from slipping and ensures a secure grip. This blade can be used for screw systems with diameters of Ø 1.3 mm, Ø 1.5 mm, and Ø 1.8 mm. With dental attachment.
dev-os | Ø 1.8 mm | Titan Mirco Screws | 5 pieces
The QUADRO titan micro screws 4018-XX have a diameter of Ø 1.8 mm. The following variations are available (please select above):4018-05: Length: 5 mm | Diameter: Ø 1.8 mm 4018-07: Length: 7 mm | Diameter: Ø 1.8 mm4018-09: Length: 9 mm | Diameter: Ø 1.8 mm4018-11: Length: 11 mm | Diameter: Ø 1.8 mm4018-13: Length: 13 mm | Diameter: Ø 1.8 mm4018-15: Length: 15 mm | Diameter: Ø 1.8 mmThe screw head with a slightly conical Quadro profile prevents the screw from spinning and improves the grip of the screwdriver. This ensures that the screw is picked up and placed securely. The screws are red anodised. They are sold in packs of 5. Can be used in combination with the dev-os QUADRO screwdriver blades 4213-20 and 4213-21
dev-os | Ø 1.2 mm | Microscrew INOX (stainless steel) | 3 pieces
The dev-os microscrews | INOX were consistently engineered to meet the specific demands of dental augmentation and demonstrate their particular strengths in the shell technique for fixation of cortical bone plates. A key factor is the high mechanical strength of the implant-grade stainless steel used. This material enables the production of screws with a diameter of just 1.0 mm and lengths of up to 14 mm while maintaining the necessary bending resistance and torsional stability. In this dimension, comparable titanium solutions are structurally limited, as very slender and simultaneously long screws made of titanium carry an increased risk of deformation or head fracture. The combination of a slim diameter and extended length allows reliable three-dimensional stabilization of bone plates, even in large augmentation volumes. Two thread diameters (1.0 mm and 1.2 mm) provide additional flexibility with regard to bone quality and the desired level of primary stability. In addition to its high mechanical strength, stainless steel offers a further clinical advantage: its intentionally low osseointegration allows even long screws to be removed in a controlled manner with moderate torque after the healing phase. This enhances safety during the second-stage procedure and reduces the risk of screw head fracture. The proven QUADRO screw head ensures form-fit torque transmission, prevents stripping, and enables precise and secure handling within the surgical field. The dev-os microscrews | INOX therefore represent maximum stability at minimal diameter and a practice-oriented system specifically tailored to the requirements of modern augmentation techniques. The dev-os INOX micro screws (stainless steel), model 4512-XX, come with a diameter of Ø 1.2 mm (a range of lengths is available for selection above):4512-04: Length: 4 mm | Diameter: Ø 1.2 mm 4512-06: Length: 6 mm | Diameter: Ø 1.2 mm 4512-08: Length: 8 mm | Diameter: Ø 1.2 mm 4512-10: Length: 10 mm | Diameter: Ø 1.2 mm 4512-12: Length: 12 mm | Diameter: Ø 1.2 mm 4512-14: Length: 14 mm | Diameter: Ø 1.0 mm Like all devemed screws, they are equipped with the reliable QUADRO screw head, which prevents rotation during handling and enhances the screwdriver’s grip. This design enables secure pickup and accurate screw placement. Each pack contains 3 screws.Compatible with the following accessories:Screwdriver blades 4210-30 (70 mm) & 4210-31 (30 mm) (requires handle 4311-00) Pilot drills 4212-10 (Ø 0.8 mm x 10 mm; gradations 4-6-8) & 4212-14 (Ø 0.8 mm x 14 mm; gradations 4-6-8-10-12-14)Inlay 4410-30 for modular toolbox 4400-10
dev-os | Ø 4.0 mm Head | Tenting-Screw INOX (stainless steel) | 2 pieces
The dev-os stainless steel Tenting-Screws were specifically developed for dental augmentation procedures within the framework of guided bone regeneration (GBR), enabling simple, controlled, and predictable bone regeneration. The umbrella-shaped screw head functions as a stable support element, reliably maintaining space between the graft material and the surrounding soft tissue. This ensures long-term preservation of the intended regenerative space and mechanically stabilizes the augmented volume. Multiple screws can be placed per defect as required, allowing both horizontal and vertical augmentations to be performed according to the specific clinical indication. The two available head diameters (4 mm and 6 mm) permit precise adaptation to the defect size and anatomical situation. Manufactured from medical-grade stainless steel, the screws are intentionally designed for minimal osseous integration and can be removed atraumatically after the healing phase, with a low risk of head fracture. In combination with the proven QUADRO drive system, this provides a user-friendly and reliable solution for modern GBR techniques. The dev-os INOX Tenting-Screws (made of stainless steel), model 4712-04-XX, have a shaft diameter of Ø 1.2 mm. The following lengths are available (please select above):4712-04-08: Length: 8 mm | Head diameter: Ø 4.0 mm | Screw diameter: Ø 1.2 mm4712-04-10: Length: 10 mm | Head diameter: Ø 4.0 mm | Screw diameter: Ø 1.2 mm4712-04-12: Length: 12 mm | Head diameter: Ø 4.0 mm | Screw diameter: Ø 1.2 mmLike all devemed screws, these are equipped with the proven QUADRO screw head, which prevents the screw from spinning and enhances the screwdriver's grip for secure pickup and precise placement. They are sold in packs of 3.Compatible with the following accessories:Screwdriver blades 4213-30 (70 mm) & 4213-31 (30 mm) (requires handle 4311-00)Pilot drill 4212-08 (Ø 1.0 mm x 8 mm; gradations 2-4-6)Inlay 4410-50 for modular toolbox 4400-10
dev-os | Ø 6.0 mm Head | Tenting-Screw INOX (stainless steel) | 2 pieces
The dev-os stainless steel Tenting-Screws were specifically developed for dental augmentation procedures within the framework of guided bone regeneration (GBR), enabling simple, controlled, and predictable bone regeneration. The umbrella-shaped screw head functions as a stable support element, reliably maintaining space between the graft material and the surrounding soft tissue. This ensures long-term preservation of the intended regenerative space and mechanically stabilizes the augmented volume. Multiple screws can be placed per defect as required, allowing both horizontal and vertical augmentations to be performed according to the specific clinical indication. The two available head diameters (4 mm and 6 mm) permit precise adaptation to the defect size and anatomical situation. Manufactured from medical-grade stainless steel, the screws are intentionally designed for minimal osseous integration and can be removed atraumatically after the healing phase, with a low risk of head fracture. In combination with the proven QUADRO drive system, this provides a user-friendly and reliable solution for modern GBR techniques. The dev-os INOX Tenting-Screws (stainless steel), model 4712-06-XX, have a shaft diameter of Ø 1.2 mm. You can choose from the following lengths (please select above):4712-06-08: Length: 8 mm | Head diameter: Ø 6.0 mm | Screw diameter: Ø 1.2 mm4712-06-10: Length: 10 mm | Head diameter: Ø 6.0 mm | Screw diameter: Ø 1.2 mm4712-06-12: Length: 12 mm | Head diameter: Ø 6.0 mm | Screw diameter: Ø 1.2 mmAs with all devemed screws, they are equipped with the proven QUADRO screw head, which prevents the screw from turning unintentionally and improves the screwdriver’s grip for secure pickup and accurate placement. The screws are sold in packs of 3.Compatible with the following accessories:Screwdriver blades 4213-30 (70 mm) & 4213-31 (30 mm) (requires handle 4311-00)Pilot drill 4212-08 (Ø 1.0 mm x 8 mm; gradations 2-4-6)Inlay 4410-50 for modular toolbox 4400-10
dev-os | Toolbox (modular)
2-in-1 toolbox incl. cover for micro screws, pins and accessories. The box is sold empty, without contents or inlays. Clear arrangementIndividually configurableSupports simple, direct storage of screws and pinsFor storage of: Handle (4311-00) Screws Pins Drills (short/long) Pin applicator 4902-20 Pin driverCompatible with the following inlays:Titanium micro screws Ø 1.0 / 1.3 mm: 4410-10Titanium micro screws Ø 1.5 / 1.8 mm: 4410-15INOX micro screws Ø 1.0 / 1.2 mm: 4410-30INOX tenting-screws Ø 4.0 / 6.0 mm head: 4410-50Pins: 4410-70
dev-os | Inlay | Titanium Micro Screws Ø 1.0 / 1.3 mm
Inlay for the modular toolbox 4400-10 and the cube 4400-15.Compatible with the following titanium micro screws:4010-054010-074010-094013-054013-074013-094013-114013-134013-15
dev-os | Inlay | Titanium Micro Screws Ø 1.5 / 1.8 mm
Inlay for the modular toolbox 4400-10 and the cube 4400-15.Compatible with the following titanium micro screws:4015-05 4015-07 4015-09 4015-11 4015-13 4015-15 4018-05 4018-07 4018-09 4018-114018-134018-15
dev-os | Inlay | INOX Micro Screws Ø 1.0 / 1.2 mm
Inlay for the modular toolbox 4400-10 and the cube 4400-15.Compatible with the following stainless steel micro screws:4510-04 4510-06 4510-08 4510-10 4510-12 4510-14 4512-04 4512-06 4512-08 4512-10 4512-12 4512-14
dev-os | Inlay | INOX Tenting-Screws Ø 4.0 / 6.0 mm head
Inlay for the modular toolbox 4400-10 and the cube 4400-15 for inserting Tenting-Screws.The inlay for the bone fixation set is compatible with the following INOX Tenting-Screws: 4712-04-08 4712-04-10 4712-04-12 4712-06-08 4712-06-10 4712-06-12
dev-os | Cube
The Cube is a supplement to the large toolbox or an alternative to the pin box 4903-00 FBC. It is designed for storing screws and pins. Thanks to various inlays, the Cube can be used flexibly. It comes with a lid but is sold empty and without an inlay.Compatible with the following inlays:Inlay for titanium micro screws Ø 1.0 / 1.3 mm: 4410-10Inlay for titanium micro screws Ø 1.5 / 1.8 mm: 4410-15Inlay for INOX micro screws Ø 1.0 / 1.2 mm: 4410-30Inlay for INOX tenting-screws Ø 4.0 / 6.0 mm head: 4410-50Inlay for titanium pins: 4410-70
dev-os | Ø 0.8 mm x 10 mm | Pilotdrill | 10 mm Stop | with dental fitting
The pilot drill 4210-10 is used to create pilot holes for dev-os stainless steel micro screws with a diameter of Ø 1.0 mm. The drill has a diameter of Ø 0.8 mm, making it slightly narrower than the screw to ensure secure anchorage in the jawbone.The drill features a built-in 10 mm stop to prevent over-drilling. Total length: 25 mm. Equipped with a standard dental shaft.Graduation: 4-6-8 mm
dev-os | Ø 0.8 mm x 14 mm | Pilotdrill | 10 mm Stop | with dental fitting
The pilot drill 4210-14 is used to create pilot holes for dev-os stainless steel micro screws with a diameter of Ø 1.0 mm. It has a diameter of Ø 0.8 mm and a cutting length of 14 mm. Pre-drilling ensures reliable anchorage in the jawbone.The drill includes a stop at 15 mm to prevent over-penetration.Total length: 33 mm Fitted with a standard dental shaftGraduation markings: 4-6-8-10-12-14 mm
Osteosynthesis screws and accessories
Discover our comprehensive screw and pin set in our dental online store, specially designed for the needs of osteosynthesis and bone augmentation. Our set offers a wide range of high-quality screws, made of titanium due to its outstanding biocompatibility, which are essential for surgical procedures in the field of bone reconstruction and augmentation.
In this category you will find titanium screws in diameters of 1.0mm, 1.3mm, 1.5mm, and 1.8mm and in lengths of 5mm, 7mm, 9mm, 11mm, as well as 13mm and 15mm for diameters greater than 1.0mm. This variety ensures that you will find the right size for every surgical need and every patient requirement. The screws are packaged in batches of five to enable efficient storage and use.
A special feature of our screws is their colour coding through anodization, which enables quick and clear identification of the screw diameter. The supplied storage box provides clear and secure storage for all screws and pins from our range.
In addition to the screws, our range also includes the necessary accessories, including the screwdriver and various blades with standard dental attachment. For the 1.0mm screws, we offer specially adapted smaller blades, while for more demanding posterior procedures, short blades are available that are compatible with the contra-angle handpiece for greater flexibility and accessibility.
Also included are the appropriate pre-drills for the respective screw sizes to precisely prepare core holes and gliding holes, depending on the application technique required. These pre-drills are crucial for the preparation of the bone and ensure optimal screw insertion. Purchase the parts individually or as a complete set, depending on your specific requirements and preferences.
Discover our selection now and secure the necessary instruments for successful bone augmentation and osteosynthesis procedures.
