Accessories
The screwdriver blade for Ø 1.0 mm QUADRO TITAN micro-screws is available in a length of 30 mm. The QUADRO profile ensures a reliable fixation and prevents the screw from slipping. This blade is compatible with screw systems of Ø 1.0 mm diameter and enables precise work. Without color marking, with dental attachment.
The drill 4213-00 is used to perform pre-drilling for dev-os QUADRO TITAN micro-screws with a diameter of Ø 1.3 mm. The pilot drill has a diameter of Ø 1.0 mm. The diameter is slightly narrower than the titanium screw to ensure a secure hold in the jaw.The drill is graduated (5-7-9-11-13 mm) and has a stop at 15 mm to prevent drilling too deep. The total length is 33 mm. With standardized dental attachment.
The screwdriver handle with silicone grip is suitable for:Screwdriver bladesPin applicatorPin driverIt enables comfortable handling. The pressure point at the back is fixed, the silicone handle can be rotated - this makes it easier to tighten and loosen screws and pins. With dental attachment.The handle is suitable for the following diameters of the dev-os system:Ø 1.0 mmØ 1.3 mmØ 1.5 mmØ 1.8 mmApplication: Place the pressure point against the palm of your hand and turn the silicone handle using your fingers. This enables simple and reliable turning by hand.
The QUADRO screwdriver blade is available in a compact length of 30 mm. The QUADRO profile provides a secure hold and prevents the screw from spinning.This blade is suitable for screw systems with Ø 1.3 mm, Ø 1.5 mm and Ø 1.8 mm diameters. Without colour coding.
The pilot drill 4210-00 is used to perform pre-drilling for the dev-os QUADRO TITAN micro-screws with a diameter of Ø 1.0 mm. The pilot drill has a diameter of Ø 0.7 mm - it is therefore slightly narrower than the titanium screw to ensure a secure hold in the jaw.The drill has a stop at 7 mm to prevent drilling too deep. The total length is 40 mm. With standardized dental attachment.
The drill bit 4215-00 is used to perform pre-drilling for the dev-os QUADRO TITAN micro-screws with a diameter of Ø 1.5 mm. The pilot drill has a diameter of Ø 1.2 mm, which is slightly smaller than the titanium screw, to ensure a secure hold in the jaw. It is graduated (5-7-9-11-13 mm) and has a stop at 15 mm to prevent over-drilling. The total length is 33 mm. With standardized dental attachment.
The drill bit 4218-00 is used for pre-drilling for the dev-os QUADRO TITAN micro-screws with a diameter of Ø 1.8 mm. The pilot drill has a diameter of Ø 1.5 mm, which is slightly smaller than the titanium screw, ensuring a secure hold in the jaw. It is graduated (5-7-9-11-13 mm) and has a stop at 15 mm to prevent over-drilling. The total length is 33 mm. With standardized dental attachment.
This screwdriver blade offers you the optimal solution for implantology. With a length of 70 mm, it is particularly long. The QUADRO profile prevents the screw from slipping and ensures a secure grip. This blade can be used for screw systems with diameters of Ø 1.3 mm, Ø 1.5 mm, and Ø 1.8 mm. With dental attachment.
The pilot drill 4210-10 is used to create pilot holes for dev-os stainless steel micro screws with a diameter of Ø 1.0 mm. The drill has a diameter of Ø 0.8 mm, making it slightly narrower than the screw to ensure secure anchorage in the jawbone.The drill features a built-in 10 mm stop to prevent over-drilling. Total length: 25 mm. Equipped with a standard dental shaft.Graduation: 4-6-8 mm
The pilot drill 4210-14 is used to create pilot holes for dev-os stainless steel micro screws with a diameter of Ø 1.0 mm. It has a diameter of Ø 0.8 mm and a cutting length of 14 mm. Pre-drilling ensures reliable anchorage in the jawbone.The drill includes a stop at 15 mm to prevent over-penetration.Total length: 33 mm Fitted with a standard dental shaftGraduation markings: 4-6-8-10-12-14 mm
The screwdriver blade for stainless steel micro screws has a length of 70 mm. The QUADRO profile prevents the screw from spinning and ensures a secure grip.This blade is compatible with INOX micro screws with diameters of Ø 1.0 mm and Ø 1.2 mm. Features a dental shaft and blue-white marking.
The screwdriver blade for stainless steel micro screws has a length of 30 mm. The QUADRO profile of the dev-os screws prevents the screw from spinning and ensures a secure grip.This blade is suitable for INOX micro screws with diameters of Ø 1.0 mm and Ø 1.2 mm. Features a dental shaft and blue-white marking.
The pilot drill 4212-10 is used to create pilot holes for dev-os stainless steel micro screws with a diameter of Ø 1.2 mm. The drill has a diameter of Ø 1.0 mm, making it slightly narrower than the screw to ensure secure anchorage in the jawbone.The drill features a built-in 10 mm stop to prevent over-drilling Total length: 25 mmEquipped with a standard dental shaft.Graduation: 4-6-8 mmSuitable for the following stainless steel micro screws:4512-044512-064512-084512-104512-124512-14
The pilot drill 4212-14 is used to create pilot holes for dev-os stainless steel micro screws with a diameter of Ø 1.2 mm. The drill has a diameter of Ø 1.0 mm, making it slightly narrower than the screw for secure anchorage in the jawbone. It features a stop at 15 mm to prevent over-drilling.Total length: 33 mmEquipped with a standard dental shaftGraduation markings: 4-6-8-10-12-14 mmSuitable for the following stainless steel micro screws:4512-044512-064512-084512-104512-124512-14
The pilot drill 4212-08 is used for pre-drilling holes for dev-os Tenting-Screws with a diameter of Ø 1.2 mm. The drill itself has a diameter of Ø 1.0 mm, ensuring optimal grip in the bone. It features a stop at 8 mm to prevent over-drilling. Total length: 23 mmEquipped with a standard dental shaft Graduation markings: 2-4-6 mm Suitable for the following Tenting-Screws: 4712-04-08 4712-04-10 4712-04-12 4712-06-08 4712-06-10 4712-06-12
The screwdriver blade for stainless steel Tenting-Screws has a length of 70 mm. The QUADRO profile prevents the screw from spinning and ensures a secure grip. This blade is compatible with INOX Tenting-Screws with Ø 4.0 mm and Ø 6.0 mm head diameters. Features a dental shaft and red marking. Suitable for the following Tenting-Screws:4712-04-084712-04-104712-04-124712-06-084712-06-104712-06-12
The screwdriver blade for stainless steel Tenting-Screws has a length of 30 mm. The QUADRO profile prevents the screw from spinning and ensures a secure grip. This blade is compatible with INOX Tenting-Screws with Ø 4.0 mm and Ø 6.0 mm head diameters. Features a dental shaft and red marking. Suitable for the following Tenting-Screws:4712-04-084712-04-104712-04-124712-06-084712-06-104712-06-12
Screwdriver blade for Ø 1.0 mm screws. The blade is 70 mm long and features the innovative QUADRO profile, which prevents the screw from turning and provides a better grip. This blade is specifically designed for screw systems with Ø 1.0 mm diameter, offering the highest quality.
