Screws
The QUADRO titan micro screws 4013-XX have a diameter of Ø 1.3 mm. They are available in the following lengths (please select above):4013-05: Length: 5 mm | Diameter: Ø 1.3 mm4013-07: Length: 7 mm | Diameter: Ø 1.3 mm 4013-09: Length: 9 mm | Diameter: Ø 1.3 mm4013-11: Length: 11 mm | Diameter: Ø 1.3 mm4013-13: Length: 13 mm | Diameter: Ø 1.3 mm 4013-15: Length: 15 mm | Diameter: Ø 1.3 mmThe screw head with the slightly conical Quadro profile prevents the screw from spinning and ensures a better grip on the screwdriver. This ensures secure pick-up and placement. The screws are yellow in colour. They are sold in packs of 5.The dev-os QUADRO screwdriver blades 4213-20 and 4213-21 are suitable for this purpose
The QUADRO titan micro screws 4015-XX have a diameter of Ø 1.5 mm and are available in different lengths (please select above):4015-05: Length: 5 mm | Diameter: Ø 1.5 mm4015-07: Length: 7 mm | Diameter: Ø 1.5 mm4015-09: Length: 9 mm | Diameter: Ø 1.5 mm4015-11: Length: 11 mm | Diameter: Ø 1.5 mm4015-13: Length: 13 mm | Diameter: Ø 1.5 mm4015-15: Length: 15 mm | Diameter: Ø 1.5 mmThe screw head with the slightly conical Quadro profile prevents the screw from spinning and ensures a better grip on the screwdriver. This ensures secure pick-up and placement. The screws are available in ‘original grey’ and are sold in packs of 5.
The QUADRO titan micro screws 4010-XX have a diameter of Ø 1.0 mm. The following lengths are available (please select above):4010-05: Length: 5 mm | Diameter: Ø 1.0 mm4010-07: Length: 7 mm | Diameter: Ø 1.0 mm4010-09: Length: 9 mm | Diameter: Ø 1.0 mmThe screw head with a slightly conical Quadro profile prevents the screw from spinning and improves the grip of the screwdriver. This ensures that the screw is picked up and placed securely. The screws are green anodised. They are sold in packs of 5. Can be used in combination with the dev-os QUADRO screwdriver blades 4210-20 and 4210-21
The QUADRO titan micro screws 4018-XX have a diameter of Ø 1.8 mm. The following variations are available (please select above):4018-05: Length: 5 mm | Diameter: Ø 1.8 mm 4018-07: Length: 7 mm | Diameter: Ø 1.8 mm4018-09: Length: 9 mm | Diameter: Ø 1.8 mm4018-11: Length: 11 mm | Diameter: Ø 1.8 mm4018-13: Length: 13 mm | Diameter: Ø 1.8 mm4018-15: Length: 15 mm | Diameter: Ø 1.8 mmThe screw head with a slightly conical Quadro profile prevents the screw from spinning and improves the grip of the screwdriver. This ensures that the screw is picked up and placed securely. The screws are red anodised. They are sold in packs of 5. Can be used in combination with the dev-os QUADRO screwdriver blades 4213-20 and 4213-21
The dev-os microscrews | INOX were consistently engineered to meet the specific demands of dental augmentation and demonstrate their particular strengths in the shell technique for fixation of cortical bone plates. A key factor is the high mechanical strength of the implant-grade stainless steel used. This material enables the production of screws with a diameter of just 1.0 mm and lengths of up to 14 mm while maintaining the necessary bending resistance and torsional stability. In this dimension, comparable titanium solutions are structurally limited, as very slender and simultaneously long screws made of titanium carry an increased risk of deformation or head fracture. The combination of a slim diameter and extended length allows reliable three-dimensional stabilization of bone plates, even in large augmentation volumes. Two thread diameters (1.0 mm and 1.2 mm) provide additional flexibility with regard to bone quality and the desired level of primary stability. In addition to its high mechanical strength, stainless steel offers a further clinical advantage: its intentionally low osseointegration allows even long screws to be removed in a controlled manner with moderate torque after the healing phase. This enhances safety during the second-stage procedure and reduces the risk of screw head fracture. The proven QUADRO screw head ensures form-fit torque transmission, prevents stripping, and enables precise and secure handling within the surgical field. The dev-os microscrews | INOX therefore represent maximum stability at minimal diameter and a practice-oriented system specifically tailored to the requirements of modern augmentation techniques. The dev-os INOX (stainless steel) micro screws 4510-XX have a diameter of Ø 1.0 mm. The following lengths are available (please select above):4510-04: Length: 4 mm | Diameter: Ø 1.0 mm4510-06: Length: 6 mm | Diameter: Ø 1.0 mm4510-08: Length: 8 mm | Diameter: Ø 1.0 mm4510-10: Length: 10 mm | Diameter: Ø 1.0 mm4510-12: Length: 12 mm | Diameter: Ø 1.0 mm4510-14: Length: 14 mm | Diameter: Ø 1.0 mmLike all devemed screws, the INOX micro screws feature the proven QUADRO screw head – this prevents the screw from spinning and improves the grip of the screwdriver. This ensures secure pickup and precise placement of the screw. They are sold in packs of 3.Compatible with the following accessories:Screwdriver blades 4210-30 (70 mm) & 4210-31 (30 mm) (requires handle 4311-00)Pilot drills 4210-10 (Ø 0.8 mm x 10 mm; gradations 4-6-8) & 4210-14 (Ø 0.8 mm x 14 mm; gradations 4-6-8-10-12-14)Inlay 4410-30 for modular toolbox 4400-10
The dev-os microscrews | INOX were consistently engineered to meet the specific demands of dental augmentation and demonstrate their particular strengths in the shell technique for fixation of cortical bone plates. A key factor is the high mechanical strength of the implant-grade stainless steel used. This material enables the production of screws with a diameter of just 1.0 mm and lengths of up to 14 mm while maintaining the necessary bending resistance and torsional stability. In this dimension, comparable titanium solutions are structurally limited, as very slender and simultaneously long screws made of titanium carry an increased risk of deformation or head fracture. The combination of a slim diameter and extended length allows reliable three-dimensional stabilization of bone plates, even in large augmentation volumes. Two thread diameters (1.0 mm and 1.2 mm) provide additional flexibility with regard to bone quality and the desired level of primary stability. In addition to its high mechanical strength, stainless steel offers a further clinical advantage: its intentionally low osseointegration allows even long screws to be removed in a controlled manner with moderate torque after the healing phase. This enhances safety during the second-stage procedure and reduces the risk of screw head fracture. The proven QUADRO screw head ensures form-fit torque transmission, prevents stripping, and enables precise and secure handling within the surgical field. The dev-os microscrews | INOX therefore represent maximum stability at minimal diameter and a practice-oriented system specifically tailored to the requirements of modern augmentation techniques. The dev-os INOX micro screws (stainless steel), model 4512-XX, come with a diameter of Ø 1.2 mm (a range of lengths is available for selection above):4512-04: Length: 4 mm | Diameter: Ø 1.2 mm 4512-06: Length: 6 mm | Diameter: Ø 1.2 mm 4512-08: Length: 8 mm | Diameter: Ø 1.2 mm 4512-10: Length: 10 mm | Diameter: Ø 1.2 mm 4512-12: Length: 12 mm | Diameter: Ø 1.2 mm 4512-14: Length: 14 mm | Diameter: Ø 1.0 mm Like all devemed screws, they are equipped with the reliable QUADRO screw head, which prevents rotation during handling and enhances the screwdriver’s grip. This design enables secure pickup and accurate screw placement. Each pack contains 3 screws.Compatible with the following accessories:Screwdriver blades 4210-30 (70 mm) & 4210-31 (30 mm) (requires handle 4311-00) Pilot drills 4212-10 (Ø 0.8 mm x 10 mm; gradations 4-6-8) & 4212-14 (Ø 0.8 mm x 14 mm; gradations 4-6-8-10-12-14)Inlay 4410-30 for modular toolbox 4400-10
The dev-os stainless steel Tenting-Screws were specifically developed for dental augmentation procedures within the framework of guided bone regeneration (GBR), enabling simple, controlled, and predictable bone regeneration. The umbrella-shaped screw head functions as a stable support element, reliably maintaining space between the graft material and the surrounding soft tissue. This ensures long-term preservation of the intended regenerative space and mechanically stabilizes the augmented volume. Multiple screws can be placed per defect as required, allowing both horizontal and vertical augmentations to be performed according to the specific clinical indication. The two available head diameters (4 mm and 6 mm) permit precise adaptation to the defect size and anatomical situation. Manufactured from medical-grade stainless steel, the screws are intentionally designed for minimal osseous integration and can be removed atraumatically after the healing phase, with a low risk of head fracture. In combination with the proven QUADRO drive system, this provides a user-friendly and reliable solution for modern GBR techniques. The dev-os INOX Tenting-Screws (made of stainless steel), model 4712-04-XX, have a shaft diameter of Ø 1.2 mm. The following lengths are available (please select above):4712-04-08: Length: 8 mm | Head diameter: Ø 4.0 mm | Screw diameter: Ø 1.2 mm4712-04-10: Length: 10 mm | Head diameter: Ø 4.0 mm | Screw diameter: Ø 1.2 mm4712-04-12: Length: 12 mm | Head diameter: Ø 4.0 mm | Screw diameter: Ø 1.2 mmLike all devemed screws, these are equipped with the proven QUADRO screw head, which prevents the screw from spinning and enhances the screwdriver's grip for secure pickup and precise placement. They are sold in packs of 3.Compatible with the following accessories:Screwdriver blades 4213-30 (70 mm) & 4213-31 (30 mm) (requires handle 4311-00)Pilot drill 4212-08 (Ø 1.0 mm x 8 mm; gradations 2-4-6)Inlay 4410-50 for modular toolbox 4400-10
The dev-os stainless steel Tenting-Screws were specifically developed for dental augmentation procedures within the framework of guided bone regeneration (GBR), enabling simple, controlled, and predictable bone regeneration. The umbrella-shaped screw head functions as a stable support element, reliably maintaining space between the graft material and the surrounding soft tissue. This ensures long-term preservation of the intended regenerative space and mechanically stabilizes the augmented volume. Multiple screws can be placed per defect as required, allowing both horizontal and vertical augmentations to be performed according to the specific clinical indication. The two available head diameters (4 mm and 6 mm) permit precise adaptation to the defect size and anatomical situation. Manufactured from medical-grade stainless steel, the screws are intentionally designed for minimal osseous integration and can be removed atraumatically after the healing phase, with a low risk of head fracture. In combination with the proven QUADRO drive system, this provides a user-friendly and reliable solution for modern GBR techniques. The dev-os INOX Tenting-Screws (stainless steel), model 4712-06-XX, have a shaft diameter of Ø 1.2 mm. You can choose from the following lengths (please select above):4712-06-08: Length: 8 mm | Head diameter: Ø 6.0 mm | Screw diameter: Ø 1.2 mm4712-06-10: Length: 10 mm | Head diameter: Ø 6.0 mm | Screw diameter: Ø 1.2 mm4712-06-12: Length: 12 mm | Head diameter: Ø 6.0 mm | Screw diameter: Ø 1.2 mmAs with all devemed screws, they are equipped with the proven QUADRO screw head, which prevents the screw from turning unintentionally and improves the screwdriver’s grip for secure pickup and accurate placement. The screws are sold in packs of 3.Compatible with the following accessories:Screwdriver blades 4213-30 (70 mm) & 4213-31 (30 mm) (requires handle 4311-00)Pilot drill 4212-08 (Ø 1.0 mm x 8 mm; gradations 2-4-6)Inlay 4410-50 for modular toolbox 4400-10
